Operation Summary

pro200-400w.qxp 4/30/2010 9:07 AM Page 21

•This inverter is designed to be connected to the power source with the supplied cables or with #8 wire up to 12’ Use #4 wire for longer length. When utilizing the supplied cables do not attempt to modify or lengthen them.

•Always make certain that the power cable terminal connections Negative (-) to Negative (-) and Positive (+) to Positive (+). Check these connections frequently to ensure that they are secure.

•Make certain the rated power consumption of the appliance or equipment you wish to operate is compatible with the capacity of your inverter.

•If the rated power consumption of the equipment is in the range of the maximum specified wattage of your converter, test the inverter to ensure that it will operate properly.

•This Inverter is not designed to operate heat generating appliances such as coffee makers, irons, hair dryers, toasters and heaters.

•Before attempting to use a battery charger see page 11.

•Before attempting to use medical equipment see page 4.

•Use only fuses which conform with the design specifications outlined in this manual.

OPERATION SUMMARY

•When operating the inverter with the engine off, start the engine every hour and let it run for at least 10 minutes to recharge the battery.

•In the event of automatic shut down, turn the inverter OFF

(O)immediately. Do not restart the inverter until the source of the problem has been identified and corrected.

•To avoid battery drain, always disconnect the inverter when not in use.

•Do not expose the inverter to moisture.

•Avoid placing the inverter near sources of heat or in direct sunlight.

•When in use, make certain that the inverter is properly ventilated.

•Do not use the inverter near flammable materials, fumes or gases.

•Always operate the inverter in accordance with the instructions in this manual. Failure to do so may result in property damage, personal injury or loss of life.