Battery-Replacement Procedure

The RG Battery Backup is designed with an easy-access battery door. Replacement of the battery requires removing the battery door on the rear of the device.

No tools are needed.

STEP 1:

Turn off power switch. Disconnect the RG Battery

Backup from power and any connected devices.

Remove the battery door on the rear of the RG Battery Backup by pressing the tab on the top of the battery door and pulling outward.

STEP 2:

Remove the battery from enclosure; remove the wire connections from the battery.

STEP 3

Connect the new battery (black-to-black, red-to-red); place the battery into enclosure.

WARNING: Carefully connect the wires to the correct terminals. The red (+) wire is labeled with a tag. The replacement battery will have color-coded terminals (red = +, black = -). Do not misconnect the wires.

STEP 4:

Securely reconnect battery door.