Belkin BU3DC000-12V Operation, Turning off the RG Battery Backup, To Silence Audible Alarm

Page 9

Operation

Turning off the RG Battery Backup

Turn switch to OFF position. The “ON A/C” LED light should turn off.

To Silence Audible Alarm

Turn mute switch to ON (down) position.

To Conduct a Self-Test

Use the self-test to verify both the operation of the RG Battery Backup and the condition of the battery. Turn the mute switch ON then OFF, then ON and OFF again within five seconds. During the self-test, the RG Battery Backup operates in backup mode.

The RG Battery Backup automatically conducts a self-test every 21 days.

NOTE: During the self-test, the RG Battery Backup briefly operates on battery-backup power. The “Testing Battery” LED will flash for five minutes during the test period. If the RG Battery Backup passes the self- test, it returns to online operation. If the RG Battery Backup fails the self- test, it immediately returns to online operation and lights the “Replace Battery” LED. The loads are not affected. Recharge the battery overnight and perform the self-test again. If the “Replace Battery” LED is still on, the battery needs to be replaced.

8

Image 9
Contents Residential Gateway RG Battery Backup Table of Contents Safety Information IntroductionSystem Requirements Recycling Package ContentsPower on/off Controls and Status IndicatorsStatus Indicators Product Layout and FunctionResidential Gateway RG Battery Backup RG Battery Backup alarms to indicate certain events Audible and Visual AlarmsConnect to AC Utility Power InstallationTurning on the RG Battery Backup Connect to the Residential GatewayTo Silence Audible Alarm Turning off the RG Battery BackupOperation To Conduct a Self-TestMounting holes Wall-Mounting Instructions OptionalNo tools are needed Battery-Replacement ProcedureTechnical Specifications Technical SpecificationsBattery @ 25 degrees C