Preparing for Installation, Possible Cause

Tr o u b l e s h o o t i n g

Power tool operates at incorrect speed

Possible Cause:

- Caused by the purely inductive load

Solution:

- Operate a small lamp or a similar non-inductive load at the same time as the tool.

Note about Modified Sine Wave Inverters

A modified sine wave inverter has a waveform more like a square wave, but with an extra step or so. A modified sine wave inverter will work fine with most equipment, although the efficiency or power will be reduced with some.

Motors, such as refrigerator motor, pumps, fans etc will use more power from the inverter due to the fact that a modified sine wave has a lower efficiency than that of pure sine wave. Most motors will use about 20% more power.

Some fluorescent lights may not operate quite as bright, or may buzz.

Electronic timers and/or digital clocks will often not operate correctly. Many appliances get their timing from the line power, and because the timing of a modified sine wave signal may be slightly different than that of a pure sine wave, clocks and timers may run faster or not work at all.

Note: Some stereo systems and radios may emit a buzzing sound from their speakers when operated from the inverter. This buzzing occurs because the radio or electronic device does not filter the modified sine wave produced by the inverter adequately.

Television interference may occur with some TV signals, even though this inverter is designed to minimize such interference. If a disturbance occurs in a weak TV signal, you may try the following to correct the problem:

-Place the TruePower inverter far away as possible from the television, the antenna cables and the antenna as well. Use an extension cable from the inverter to the TV if necessary.

-Make sure the TV antenna provides a snow free signal when operated on a source other than the inverter. Additionally, we recommend the use of a high quality, shielded antenna cable.

-Coil the TV power cord as well as the input power cables running from the battery to the inverter.

-Attach an AC interference filter or similar filter product between the inverter and televisions power cord. This type of filter is available at most electronic supply stores.

-Try a different Television set as different models and manufacturers vary in their vulnerability to interference.

S a f e t y & P r e c a u t i o n s / I n s t a l l a t i o n P r e p a r a t i o n s

Personal Safety Precautions Continued

5.Be extra cautious to reduce the risk of dropping a metal tool onto a battery. It may spark or short-circuit the battery or other electrical parts that may cause an explosion.

6.Remove all personal metal items such as rings, bracelets, necklaces, watches and jewelry when working near a battery. A battery can produce a short circuit high enough to weld a ring or any metal, causing serious burns.

7.Never charge or invert power from a frozen battery.

*WARNING: Restrictions on Use- The TruePower inverter shall not be used in connection with life support systems or other medical equipment devices.

Preparing for Installation

Read this entire installation section if you plan a hardwire installation from beginning to end.

WARNING: This devise is not Ignition Protected

Avoid serious injury or death from or explosion. Do not install in compartments containing gasoline fueled engines or gasoline tank, or in areas where ignition protected equipment is required.

WARNING: Do not mount the inverter above or below your batteries.

WARNING: Electrical shock and fire hazards

On Board Solutions, a ProMariner Company recommends all wiring be done by qualified personnel. Disconnect all AC and DC power sources to prevent accidental shock. Disable and secure all AC and DC disconnect devices and automatic generator starting devices. It is the installer’s responsibility to ensure compliance with all the applicable installation codes and regulations.

WARNING: Installation Precaution

The TruePower inverter should be mounted on a flat horizontal surface or a vertical surface with the front panel and label facing the user. In no case should the front or rear endcaps be facing in an upward or downward position. This allows proper ventilation and product safety of the unit as intended by design.

WARNING: Fire Hazard

Do not cover or obstruct the ventilation openings. Do not install this equipment in a compartment with limited airflow; Overheating may result.

5300, 5200, 5150, 5250, 5170 specifications

Battery-Biz offers a comprehensive range of batteries designed to serve various electronic devices and applications. Among its popular models are the Battery-Biz 5170, 5250, 5150, 5200, and 5300, each boasting unique features, technologies, and characteristics tailored to meet diverse user needs.

The Battery-Biz 5170 is designed with advanced lithium-ion technology, providing reliable power for smartphones and tablets. Its compact design ensures compatibility with a range of devices, while the rapid charge capability allows users to quickly recharge their gadgets, making it ideal for busy lifestyles. The 5170 also features integrated safety mechanisms to prevent overcharging and short circuits, emphasizing user safety.

Next in the lineup is the Battery-Biz 5250, which is particularly known for its high capacity. This model is ideal for heavy users who rely on extended battery life for laptops and portable gaming devices. With a robust power output, the 5250 delivers consistent performance, ensuring that devices can run longer without interruption. Additionally, its energy-efficient design contributes to reducing overall energy consumption.

The Battery-Biz 5150 stands out due to its lightweight construction, making it perfect for users who prioritize portability. Whether for travel or daily commuting, the 5150's slim profile doesn’t compromise on power. It incorporates smart charge technology, which intelligently adjusts the charging speed based on the device's requirements. This means faster charging without the risk of overheating.

The Battery-Biz 5200 offers flexibility and versatility, designed to work flawlessly with various devices from laptops to peripheral accessories. It features multiple output ports, allowing users to charge multiple devices simultaneously. The 5200 integrates advanced thermal management technology, ensuring optimal performance even in demanding situations.

Lastly, the Battery-Biz 5300 is engineered for endurance. With an extra-large capacity and rugged design, it is the perfect choice for outdoor enthusiasts and professionals working in challenging environments. The 5300 is also water-resistant and shockproof, making it robust enough to withstand harsh conditions while delivering dependable power.

In summary, Battery-Biz’s range of models, including the 5170, 5250, 5150, 5200, and 5300, exemplifies a dedication to innovation and user-centric design. Each model caters to unique user needs, ensuring that whether for everyday use, travel, or professional applications, there is a Battery-Biz option ready to provide reliable power.