Stearns B523 manual Knowing Your Valves, Type I, Make Sure

Page 12

5.2 KNOWING YOUR VALVES

Yukatat™ kayak uses three types of valves. Type I (Type II, is a smaller version) to inflate floor and main chambers. Type IV is used to fill small chambers such as spray rings and spray deck lifters.

Type I (II)

Valve

Cap

		To inflate
	Welded	.
	Welded	To deflate
	Reciprocal	To deflate

Type IV

Twist to inflate/deflate

5.3 MAKE SURE:

1.Air chamber valves are centered with the inflation valve cover

2.Upper and lower weld seams of the air chambers are running parallel

with the cover and centered all around

If the air chambers are not aligned or centered: A. Relieve air pressure

B. Unzip the cover C. Partially inflate

D. Realign air chambers, zip cover and inflate chambers

3.All valves are closed tightly

4.Bow and stern frame assembly are aligned

Image 12

Contents Yukatat B523 St. Cloud, Minnesota 56302 U.S.A Phone 320 252-1642 orMANUFACTURER’S Certificate of Origin For a Vessel First AssignmentTable of Contents Declaration of Conformity Warranty IntroductionModifications Boating Safety Boat Safety Labels Boating RegulationsRegistration EducationRestricted Areas Responsibilities of the OperatorsThis Kayak is not a Personal Flotation Device AlcoholSpecifications CapacityYukatat B523 Yukatat capacity labelFeatures Inflation SetupPreparing Your Stearns Inflatable Kayak YukatatQuick Start to Inflating Your Kayak Do not Over Inflate Main Chambers beyond 1.75 psi 0.12 barKnowing Your Valves Type IType Make SureOver Inflation Underway Before You StartTransporting, Carrying and Towing Care and Maintenance FoldingRepairing Small Punctures and Cuts Repairing PinholesRepairs Troubleshooting Problem SolutionRepairing Pinholes Read Care and Maintenance sectionLimited Warranty Stearns Stearns Drive Sauk Rapids, MNUSA Please Type or Print Clearly Thank you for responding to the followingIf yes Business Reply Mail