7.3 Seam Openings
Seam openings are difficult to repair but can be done with certain seam repair adhesives. Contact STEARNS® for more information or ask your local marine shop.
8. TROUBLESHOOTING
This chart will help you find and correct minor problems with your kayak.
Problem | Solution |
|
|
Slow leak. | Check valve gaskets and make sure the |
| cap tether is not interfering with the seal. |
| The valve gaskets must be closed tightly. |
|
|
Still leaks slowly. | Check for pinholes. Read section |
| “Repairing Pinholes.” |
|
|
Air valves don’t align. | Let air out of both chambers to allow you to |
| shift the inner tube to match up with the |
| valve holes in the cover. |
|
|
Doesn’t inflate | Make sure that the tube is aligned. |
completely. |
|
|
|
The zipper is stuck. | Read “Care and Maintenance” section |
| (6.3) regarding zippers. |
|
|
Difficulty draining water. | Wipe off excess water with a high absorbing |
| sponge or towel. The kayak dries much |
| quicker inflated, and in a well ventilated |
| area. Do not expose in direct sunlight to dry. |
| Deflate kayak and briefly hang it from the |
| molded handles with seat removed and |
| seating compartment exposed. To avoid |
| mold, do not pack or fold while kayak is |
| damp or wet. |
|
|
15