Xantrex Technology 175 manual Connecting the Adapter and DC Cable

Page 16

CAUTION: Reverse polarity damage

When plugging in the DC cable, ensure that the plug aligns with the DC cable port. Failure to do so will result in reverse polarity and a blown fuse.

3.Insert the cigarette lighter plug into the 12 V outlet.

4.Plug the device you want to operate into the XPower inverter. See “Inverter Operation” on page 14.

5.When the power inverter is not in use, unplug it from the 12 V outlet to prevent slight discharge of the battery.

Press latch to remove adapter.

Align plug correctly (green line to green line).

Figure 2 Connecting the Adapter and DC Cable

11

Image 16

Contents XPower Pocket Inverter About Xantrex Date and Revision Contents Specifications Introduction Page Important Safety Information Page Page Page Additional Safety Guidelines Safety Features Inverter Features Features and AccessoriesUsing the Inverter Using the DC Cable with Cigarette Lighter PlugConnecting the Adapter and DC Cable Using the DC Cable with Airplane Power Plug Airline Compatibility Inverter Operation Operating GuidelinesPage Battery Operating Time Interference with Electronic EquipmentBuzzing sound in audio systems and radios Troubleshooting Possible cause RemedyProblem AC product will not operate, red Fault light on Replacing the Fuse AC Power Output H8 SpecificationsUSB Power Output DC Power Specifications Physical SpecificationsWarranty and Return WarrantyPage Page Page Disclaimer ProductExclusions Page Return Material Authorization Policy Return Procedure Out of Warranty Service