Xantrex Technology 2000i, 700i, 1400i manual Input Voltage, Operating Condition, Comment

Page 26

Operation

Input Voltage

The input voltage limits are shown in the following table.

Operating

 

 

Condition

Voltage Range

Comment

 

 

 

Normal

10.5–15.5 V

None.

 

 

 

Peak Performance

12–13 V

None.

 

 

 

Low Voltage Alarm

Voltage is

The audible low battery

 

11.0 V or less

alarm sounds.

 

 

 

Low Voltage

Voltage is

The unit shuts down to

Shutdown

10.5 V or less

protect the battery from

 

 

being over-discharged.

 

 

 

High Voltage

Voltage is

The unit shuts down to

Shutdown

15.5 V or more

protect itself from

 

 

excessive input voltage.

 

 

NOTE: Although the

 

 

PROwatt SW

 

 

incorporates over-

 

 

voltage protection, it can

 

 

still be damaged if input

 

 

voltage exceeds 16 V.

 

 

 

Unit startup voltage

12.0 V

The unit will not restart

or Unit restarts after

 

unless the battery

low voltage

 

voltage is acceptable for

shutdown

 

running the load.

 

 

 

18

Xantrex PROwatt™ SW International Sine Wave Inverter Owner’s Guide

Image 26
Contents Sine Wave Inverter Page Exclusion for Documentation About Xantrex About Schneider ElectricTrademarks Date and RevisionAbout This Guide Important Safety Instructions ReferencePrecautions When Working With Batteries Contents Page Introduction Quality PowerModel Continuous Surge Power PROwatt SW SeriesEase of Use Comprehensive ProtectionMaterials List FeaturesOptional Accessory Feature Description Front Panel DetailsBack Panel Details Cooling Fan/sGuidelines InstallationBasic Installation Steps Tools and MaterialsDetermine a Charging System Determine Battery CapacityChoose a Location Mount The Inverter Grounding Locations Connect The Battery CablesConnect the Chassis Ground Cabling Guidelines For exampleAmps Fuse/Circuit Breaker Sizing GuidelinesTotal Cold Cranking Cabling Procedure DC LoadsInstallation Installation Operating Several Loads at Once OperationTurning the Inverter On and Off Turning the Inverter Off Between ChargesDigital Display Reading the Front Panel IndicatorsIndicator LEDs Description of LED and Digital Display CodesRestarting After an AC Output Shutdown Changing the Audio Alarm SettingPower Output Operating LimitsComment Input VoltageOperating Condition Exceptional Loads Battery Charging Frequency Routine MaintenanceInverter Loads Problem Possible Cause Solution TroubleshootingTroubleshooting Reference Troubleshooting Specifications Physical and Environmental SpecificationsWarranty and Return Information WarrantyWarranty and Return Information Product Return Material Authorization PolicyDisclaimer Return Procedure Out of Warranty ServiceAlarm sounding? Information About Your SystemPage Page Xantrex Technology Inc

2000i, 700i, 1400i specifications

Xantrex Technology is a recognized leader in power conversion technology, producing a range of inverter solutions that cater to various needs, especially for recreational vehicles, boating, and off-grid applications. Among its prominent products are the Xantrex 1400i, 700i, and 2000i inverters. These devices are specially designed to provide reliable, efficient power in compact form factors, making them ideal for a diverse range of users.

The Xantrex 1400i inverter is well-suited for mid-sized applications. It offers a robust 1400 watts of continuous power output with a surge capacity of 2800 watts. This model features a modified sine wave output, allowing it to run common household appliances like televisions, microwaves, and power tools without issues. Its lightweight design and integrated cooling system ensure efficient operation, maintaining performance and extending product life under various conditions.

The Xantrex 700i inverter caters to those with lower power requirements, delivering 700 watts of continuous output and 1400 watts for transient loads. Its compact design makes it an ideal choice for smaller RVs and boats or for use in emergency backup systems. The 700i also incorporates a built-in USB port, allowing users to charge mobile devices conveniently. Despite its size, the 700i is designed for maximum efficiency, ensuring that users can get energy where they need it without unnecessary loss.

On the other hand, the Xantrex 2000i inverter stands out with its ability to provide 2000 watts of continuous power and a surge capacity of 4000 watts. This model is particularly beneficial for those who demand higher power for larger appliances or multiple devices simultaneously. The 2000i is also equipped with advanced safety features, including overload protection, short-circuit protection, and thermal shutdown, ensuring that users can rely on consistent and safe power delivery.

All three models leverage Xantrex's innovative technologies, including advanced digital signal processing and high-frequency transformer design, to maximize performance and reliability. They are versatile enough for a range of applications from off-grid living to emergency power solutions, making them suitable for outdoor enthusiasts and homeowners alike. Overall, Xantrex's 1400i, 700i, and 2000i inverters exemplify the brand's commitment to quality, performance, and user-friendly design, ensuring dependable power wherever and whenever it's needed.