Xantrex Technology 1400i Restarting After an AC Output Shutdown, Changing the Audio Alarm Setting

Page 25

Operation

Restarting After an AC Output Shutdown

1.Press and hold the unit’s power switch button to turn it Off.

2.Remove all AC loads or let the unit cool down for 15 minutes.

3.Press and hold the unit’s power switch button to turn it On.

Changing the Audio Alarm Setting

1.Press and hold the power switch button for five seconds. NOTE: You will hear a beep after holding the button for about one second. Keep holding the button for five seconds more to change the alarm setting.

2.Observe the message on the digital display.

If you see a L 1 being displayed, this indicates that the audio alarm is enabled even during warning conditions. If you see a L 0 being displayed, this indicates that the audio alarm is disabled.

NOTE: Factory setting is a L 1 .

3.Release the button to which setting you want.

NOTE: Holding the power switch button continuously for more than five seconds at a time will cycle the alarm setting to a L 1 then to a L 0 and so on until the button is released.

Operating Limits

Power Output

The PROwatt SW will deliver the following power continuously, depending on input voltage and ambient temperature. The inverter will deliver more than 10% of its continuous power rating for approximately five minutes.

Model

Powera

Currentb

Voltage

Temp.

 

 

 

 

 

PROwatt SW 700i

700 W

3 A

 

Ambient

 

 

 

 

PROwatt SW 1400i

1400 W

6 A

 

12.5 Vdc

25 °C

 

 

 

 

(77 °F)

PROwatt SW 2000i

2000 W

8.7 A

 

 

 

 

 

 

 

 

a.Applies to resistive loads such as incandescent lights. b.Applies to reactive loads such as motors.

975-0525-01-01

17

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Sine Wave Inverter Page Trademarks About Xantrex About Schneider ElectricExclusion for Documentation Date and RevisionAbout This Guide Reference Important Safety InstructionsPrecautions When Working With Batteries Contents Page Model Continuous Surge Power Quality PowerIntroduction PROwatt SW SeriesComprehensive Protection Ease of UseOptional Accessory FeaturesMaterials List Front Panel Details Feature DescriptionCooling Fan/s Back Panel DetailsBasic Installation Steps InstallationGuidelines Tools and MaterialsChoose a Location Determine Battery CapacityDetermine a Charging System Mount The Inverter Connect the Chassis Ground Connect The Battery CablesGrounding Locations For example Cabling GuidelinesTotal Cold Cranking Fuse/Circuit Breaker Sizing GuidelinesAmps DC Loads Cabling ProcedureInstallation Installation Turning the Inverter On and Off OperationOperating Several Loads at Once Turning the Inverter Off Between ChargesIndicator LEDs Reading the Front Panel IndicatorsDigital Display Description of LED and Digital Display CodesPower Output Changing the Audio Alarm SettingRestarting After an AC Output Shutdown Operating LimitsOperating Condition Input VoltageComment Inverter Loads Battery Charging Frequency Routine MaintenanceExceptional Loads Troubleshooting Reference TroubleshootingProblem Possible Cause Solution Troubleshooting Physical and Environmental Specifications SpecificationsWarranty Warranty and Return InformationWarranty and Return Information Disclaimer Return Material Authorization PolicyProduct Out of Warranty Service Return ProcedureInformation About Your System Alarm sounding?Page Page Xantrex Technology Inc

2000i, 700i, 1400i specifications

Xantrex Technology is a recognized leader in power conversion technology, producing a range of inverter solutions that cater to various needs, especially for recreational vehicles, boating, and off-grid applications. Among its prominent products are the Xantrex 1400i, 700i, and 2000i inverters. These devices are specially designed to provide reliable, efficient power in compact form factors, making them ideal for a diverse range of users.

The Xantrex 1400i inverter is well-suited for mid-sized applications. It offers a robust 1400 watts of continuous power output with a surge capacity of 2800 watts. This model features a modified sine wave output, allowing it to run common household appliances like televisions, microwaves, and power tools without issues. Its lightweight design and integrated cooling system ensure efficient operation, maintaining performance and extending product life under various conditions.

The Xantrex 700i inverter caters to those with lower power requirements, delivering 700 watts of continuous output and 1400 watts for transient loads. Its compact design makes it an ideal choice for smaller RVs and boats or for use in emergency backup systems. The 700i also incorporates a built-in USB port, allowing users to charge mobile devices conveniently. Despite its size, the 700i is designed for maximum efficiency, ensuring that users can get energy where they need it without unnecessary loss.

On the other hand, the Xantrex 2000i inverter stands out with its ability to provide 2000 watts of continuous power and a surge capacity of 4000 watts. This model is particularly beneficial for those who demand higher power for larger appliances or multiple devices simultaneously. The 2000i is also equipped with advanced safety features, including overload protection, short-circuit protection, and thermal shutdown, ensuring that users can rely on consistent and safe power delivery.

All three models leverage Xantrex's innovative technologies, including advanced digital signal processing and high-frequency transformer design, to maximize performance and reliability. They are versatile enough for a range of applications from off-grid living to emergency power solutions, making them suitable for outdoor enthusiasts and homeowners alike. Overall, Xantrex's 1400i, 700i, and 2000i inverters exemplify the brand's commitment to quality, performance, and user-friendly design, ensuring dependable power wherever and whenever it's needed.
Top Page Image Contents