OPERATION
5.Fit the remaining floorboards and H channels together. On models having four floorboards, position boards (No. 2 and 3) so they are forming an inverted V shape. On models having five floorboards, position boards (No. 3 and 4) so they are forming an inverted V shape. Align the side edges of the floorboards so they are straight and then push down on the V joint to flatten the floorboards.
b
a
10139
a - H channels ‑ Larger | b - Push down |
flat side facing up |
|
6.Slightly inflate the keel in order to raise the floorboards off the floor.
25