Hobie 60 manual Seat Bottom Lacing, Seat Back Preparation, Seat Adjustment System, Safety Tether

Page 6

STEP 7- Seat Bottom Lacing

Locate the two short and one long black lacings (Item 9). Flip pontoons over, vent caps facing down. Using the two short lacings, tie a double half hitch at each outer grommet of the short flap. Pass lacing over crossbar and up through opposite outside grommet located on the long flap. Pass lacing back and down through the opposite grommet. Tie a double half hitch around all lacing. Using the long lacing, start at one end with a half hitch and lace grommets together as diagrammed. NOTE: Center grommet on flap is for the backpack system and should not be laced.

STEP 8- Seat Back Preparation

Locate black plastic molded seat back (Item 4), 10” aluminum posts with plastic molded C clamps (Item 5), and two 3/4” Phillips head screws (Item 6). Insert screws into the recessed holes of seat back. Insert seat back posts up through holes in flanged bottom edge of seat back and thread posts onto screws. Snap molded C clamps onto forward crossbar where cutaways in seat bottom reveal crossbar.

DOUBLE HALF HITCH

STEP 9- Seat Adjustment System

Locate 3” loop with buckle and the 56” strap with two male buckles. Flatten the 3” loop and pass upwards through outside slot located on the top flange of the seatback. Pull snugly until stopped by buckle.

Insert flattened loop down through inside slot. Remove male buckle off end of 56” strap. Locate slots on sides of seatback adjacent to white nylon fittings. Insert webbing from the front through slot. Pass webbing between seat back and seat posts, up through 3” webbing loop, and out through opposite slot. Replace buckle on end of strap. Snap male buckles into female buckles located on 6” loops previously installed around crossbars. Adjust length for comfort.

STEP 10- Safety Tether

Locate safety tether. Pass looped lacing end around rear crossbar on either side. Pass Velcro end through loop and pull to secure tether onto crossbar.

Rod Holder

Fly Rod or Spinning Reel Adjustments

Your rod holder is designed to carry either a fly rod or a spinning reel. A rod keeper pin is attached by a 10/32 screw found on the flat side of the rod holder. The pin can be moved to the adjacent hole for use on the opposite side of your Float Cat. This pin must be removed for use with a fly rod and left in place for use with a spinning reel.

Cradle Positions

Pull out on the rod cradle to adjust your rod holder to different positions. Your rod cradle adjusts for either side of your Float Cat and from horizontal (rod lies flat), to two trolling positions and to vertical.

Warning

When using the rod holder while trolling a very large strike could adjust the rod holder to the flat position. A rod tether is recommended.

Seat Pad Cushion

The foam inside the seat pad is cut thinner where the pad wraps the crossbar. Locate the thinner portion. Align Velcro strips on seat with Velcro strips on mesh seat bottom and press into place.

6

Image 6
Contents Float CAT Hobie Float CAT Index Hobie Float Cat Assembly Pontoon PlacementVent Caps Forward Crossbar InstallationRear Crossbar Installation Seat BottomSeat Bottom Lacing Seat Adjustment SystemSafety Tether Seat Back PreparationHull Bag Snap ButtonStuck Snap Button Safety Precautions Suggested Additional EquipmentEntering Your Float Cat Maneuvering With FinsFishing Techniques Maneuvering With Oars Do’s & Don’tsPage Warranty

60 specifications

The Hobie 60, a remarkable advancement in sailing technology, represents the epitome of performance and versatility in the world of catamarans. Designed with both casual sailors and competitive racers in mind, the Hobie 60 combines innovative engineering with the rich heritage of the Hobie brand, known for producing high-quality watercraft.

One of the standout features of the Hobie 60 is its impressive size. With a length of 60 feet, it offers ample space for both relaxation and performance sailing. Its generous beam ensures stability, allowing it to glide effortlessly over waves, making it an ideal choice for those seeking exhilarating sailing experiences. The spacious deck layout promotes comfort, enabling crew members to move around freely while enjoying the open waters.

Performance is at the heart of the Hobie 60, equipped with a powerful rig that optimizes sail area and enhances speed. The advanced sail design incorporates modern materials that are lightweight yet durable, allowing the vessel to achieve impressive velocities in various wind conditions. Additionally, the Hobie 60 features a state-of-the-art rigging system that allows for quick adjustments, ensuring effortless handling, even for novice sailors.

Technologically, the Hobie 60 showcases an advanced hull design that reduces drag and enhances buoyancy. The catamaran's dual hulls, crafted from high-quality fiberglass or composite materials, provide not only strength but also agility, enabling sharp turns and quick accelerations. The hulls are designed to cut through the water efficiently, delivering a smooth sailing experience while maintaining stability in choppy conditions.

Another notable characteristic of the Hobie 60 is its user-friendly design. The boat is equipped with intuitive controls and ergonomic seating, making it accessible for sailors of all skill levels. The large cockpit area promotes social interactions, making it perfect for gatherings and celebrations on the water. Moreover, the vessel's storage solutions ensure that all essential gear can be easily stowed, keeping the deck clutter-free.

In conclusion, the Hobie 60 is a remarkable sailing vessel that blends performance, comfort, and cutting-edge technology. With its impressive dimensions, innovative design, and user-friendly features, it appeals to a broad range of sailing enthusiasts. Whether embarking on a leisurely cruise or competing in races, the Hobie 60 stands out as a symbol of excellence in the world of sailing.