,QVWDOORXWHUKROGHURQWKHLQQHU
KROGHUDQGVHFXUHZLWKVFUHZV
• Tighten the screws with the supplied hexagonal wrench.
• Fit the inner holder to the steering wheel so that the arrow-marked side faces the driver as shown below.
6HFXUHLQQHUKROGHUWRWKHLQQHU
FLUFXPIHUHQFHRIWKHVWHHULQJZKHHO ZLWKEHOW
Installing the Unit on a Left-Hand-Drive Car
1RWH
• When the unit is installed on a
Belt
&XWWKHH[WUDSRUWLRQRIWKHEHOWDW WKHFHQWHURIWKHLQQHUKROGHU
• Keep the
Screw
Outer holder
,QVWDOOWKHUHPRWHFRQWUROXQLWLQWKH KROGHU
• When removing the remote control unit from the holder, move the corrugated release section toward the steering wheel and slide the remote control unit toward you.
Release Section