Ingersoll-Rand 5597, 5596, 5599 specifications AIR Motor 501 Ratio, Service Kits, Specifications

OPERATOR’S MANUAL	559X
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING	RELEASED: 2-3-03
INCLUDE MANUAL: S-632 GENERAL INFORMATION (PN 97999-624).	REVISED: 9-27-11
	(REV. H)

2” AIR MOTOR 50:1 RATIO

0 - 7500 P.S.I. RANGE

5596, 5597, 5598, 5599

CHOP-CHECK GREASE PUMP

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

•Use only genuine IRRreplacement parts to assure compatible pres- sure rating and longest service life.

•637385 Pump Rebuild Kit. Includes the necessary soft parts for normal service of the entire pump.

SPECIFICATIONS
Model Series	. . . . . . .	. . 559X
Type	Air Operated, Chop-Check Grease Pump
Ratio	. . . . . . .	. . 50:1
Air Motor Diameter . . . .	. . . . . . .	. . 2” (5.08 cm)
Stroke	. . . . . . .	. . 3” (7.62 cm)
Air Inlet (female)	. . . . . . .	. . 1/4 - 18 N.P.T.F. - 1
Material Outlet (female)	. . . . . . . .	. . . 3/8 - 18 N.P.T.F. - 1
Pump Construction . .	. . . . . . .	. . Carbon Steel
Dimensional Data	. . . . . . .	. . see chart
Weight	. . . . . . .	. . see chart
PERFORMANCE
Air Inlet Pressure Range	. . . . . . .	. . 0 - 10.3 bar (0 - 150 p.s.i.)
Fluid Pressure Range . .	. . . . . . .	. . 0 - 517.2 bar (0 - 7500 p.s.i.)
Cycles / Minute Rec’d @ Working Flow . . 80
Displacement In3 Per Cycle		. . 0.300
Volume / Cycle	. . . . . . .	. . 6.55 ml (0.22 oz.)
Maximum Delivery / Minute		. . 4.1 kg (9 lbs)
Noise Level @ 100 p.s.i		. . 85 db (A) 1
Accessories Available . .	. . . . .	61113 Wall Mount Bracket
		66073-1 Air Line Connection Kit

1Tested with 95086 mufflerassembly installed.

The pump sound pressure level has been updated to an Equivalent Continuous Sound Level (LAeq) to meet the intent of ANSI S1. 13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

GENERAL DESCRIPTION

The model 559X series chop-check grease pump is intended to be used primarily for grease delivery systems. It uses carbon steel and other ma- terials which make it compatible with most petroleum based lubrication products.

NOTE: If this pump was purchased separately (not part of a system), consult your sales representative for compatible dispensing accesso- ries which will best match the application. All accessories must be able to withstand the maximum pressure developed by the pump.

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET - BRYAN, OHIO 43506

(800) 495--0276 D FAX (800)892--6276	E2011	CCN 20083093
www.ingersollrandproducts.com

PUMP DATA

MODEL 559X

Air Inlet (female)

(1/4 - 18 N.P.T.F. - 1)

1-1/4”

(31.8 mm)

Material Outlet (female)

(3/8 - 18 N.P.T.F. - 1)

2” N.P.S.M. Bung Adapter

“A”

“B”

Figure 1

8 mm (5/16”) Thru hole

NOTE: Dimensions are shown in inches and (mm), supplied for reference only and are typically rounded up to the nearest 1/16 inch.

MODEL	“A” (mm)	“B” (mm)	WEIGHT (kg)
5596	27-3/4” (704)	16-9/16” (421)	15 (6.8)
5597	30-1/2” (774)	19-5/16” (490)	15.9 (7.2)
5598	38-7/16” (976)	27-1/4” (692)	18.3 (8.3)
5599	48” (1219)	36-13/16” (935)	21.2 (9.6)

IMPORTANT

This is one of two documents which support the pump. Replace- ment copies of these forms are available upon request.

=559X Model Operator’s Manual (pn 97999-1033)

-S-632General Information Lubrication Piston Pumps (pn 97999-624).

WARNING READ THE GENERAL INFORMATION MANUAL

INCLUDED FOR ADDITIONAL OPERATING AND SAFETY PRE- CAUTIONS AND OTHER IMPORTANT INFORMATION.