810TM TX
Bass Enclosure
SPECIFICATIONS
Frequency Response, 1 meter
Power Handling:
400 W continuous (40 V RMS)
800 W program
Transducer Complement:
Eight 10” KevlaKB impregnated woofers One phenolic dome horn tweeter
Box Tuning Frequency:
35 Hz
Crossover Frequency:
3.5 kHz
Impedance, Z: 4 ohms nominal 3.8 ohms minimum
Input Connections:
One l/4” phone jack
Enclosure Materials & Finish:
3/4” plywood, carpet covered with metal corners and an expanded metal grille
Dimensions (H x W x D): 49” x 24.5” x 17.25”
(124.5 cm x 62.2 cm x 43.8 cm)
Net Weight:
148 Ibs. (67.3 kg)
DESCRIPTION
The 81 OTM TX is the newest, biggest, and badest bass box from Peavey. New IO” drivers were developed specifically for the 810 TX. To decrease unwanted distortion, KevlarB impregnated cones were used in these drivers. Increased low frequency output is accomplished by a substantial vent at the bottom of the enclosure. The upper harmonics needed to accurately reproduce sharp, tight transients are handled by a horn
loaded tweeter. An automatic resetting protection device has been placed in the signal path of the tweeter. Should too much power start going to the tweeter this protection device will trip resulting in almost no output from the tweeter. As soon as the power level of the high frequencies returns to a nominal level, the device will reset itself and output from the tweeter will return. An
be custom tailored to any style of playing or particular sound.
The 810 TX is a 4 ohm enclosure capable of handling up to 800 watts.
