Graco 120108 Series C Typical Transceiver Installations, One -Transceiver Facility Layout

Page 4

Typical Transceiver Installations

Typical Transceiver Installations

It is recommended that you locate the transceiver in the main part of the shop, near the meters and/or tank level mon- itors. If the transceiver is mounted outdoors, it must be placed into a protective water proof, non-metallic outside hous- ing. Be sure to comply with all applicable local, state, and national fire, electrical, and safety regulations.

One -Transceiver Facility Layout

Parts	Tank
Room	Room

Matrix Computer

Meters

Transceiver

TLM

TLM

Meters

Meters	Meters

Up to 100 ft (30.5 m)

RS 232 connection.

Up to 4000 ft (1219 m)

RS422 connection.

FIG. 1

4

309498H

Image 4

Contents Transceiver Contents Manual ConventionsFire and Explosion Hazard Typical Transceiver Installations One -Transceiver Facility LayoutTransceiver Connections Two -Transceiver Facility LayoutTransceiver Connection/Wiring Connection Transceiver Dipswitch Settings Changing Dipswitch Settings Removing the Transceiver CoverDipswitch Setting using RS232 Connection RS422 Cable Settings Dipswitch Setting using RS422 ConnectionComponents Mounting Bracket Transceiver Diagnostics Indicator Diagnostic DefinitionOperation Function DescriptionTransceiver Parts Part No. DescriptionTroubleshooting Problem Cause SolutionTechnical Data TransceiverDimensions Mounting Bracket Hole DimensionsGraco Standard Warranty Graco Information