Chauvet DMX512 user manual Setting up a DMX Serial Data Link, Master/Slave Fixture Linking

Page 12

3 -PIN TO 5 -PIN CONVERSION CHART

Note! If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion:

3PIN TO 5 PIN CONVERSION CHART

Conductor

3 Pin Female (output)

5 Pin Male (Input)

 

 

 

Ground/Shield

Pin 1

Pin 1

 

 

 

Data ( - ) signal

Pin 2

Pin 2

Data ( + ) signal

Pin 3

Pin 3

Do not use

 

Do not use

Do not use

 

Do not use

Setting up a DMX Serial Data Link

Universal DMX Controller

1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the controller.

2.Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.

3.Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

CHAUVET Certified DMX Data Cables

Order Code

Description

DMX1.5

DMX Cable 1.5m/4.9ft

DMX4.5

DMX Cable 4.5m/14.8ft

DMX10

DMX Cable 10m/32.8ft

Continue the link

This drawing provides a general illustration of the DMX Input/Output panel of a lighting fixture.

Master/Slave Fixture Linking

1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.

2.Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

Often, the setup for Master-Slave and Standalone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP- switches. Secondarily, the fixtures that follow may also require a slave setting. Please consult the “Operating Instructions” section in

for this type of setup and configuration.

Slave

Slave

Master

COLORdash™ Par User Manual

12

9/4/2008 12:09 PM

Image 12
Contents Snapshot Table of Contents What is included Before YOU BeginUnpacking Instructions Safety Instructions LED Expected LifespanFeatures IntroductionDMX Channel Summary ARC1+DProduct Overview Setup AC PowerMounting OrientationRigging Lens Assembly Installation/Replacement LED PCBFixture Linking Data CablingDMX Setting up a DMX Serial Data Link Master/Slave Fixture LinkingMenu  Settings  ID address  01 ~ Operating InstructionsControl Options DMX-512 control without ID addressCOLORcon Setup Menu  Settings  Range  No. of fixturesSetting the DMX address Password Menu LockoutControl Panel Functions Upload Customs Menu Map2008 1209 PM DMX512 Channel Values Auto Speed Channel 9 ID Address SelectionImportant Notes about Stage 1 DMX Operation Master DimmerOverview Setup Colorado ControllerMenu Map Wash ProgramEffect Program Play Schedule Activating password mode Reset to factory settingsControl via external DMX Technical Support Contact UsWorld Wide Web Appendix DMX PrimerGeneral Maintenance Returns ProcedureClaims Paper inside the boxPhotometrics Colordash PARService Maintenance Guide Technical Support at the location onBlow-out Diagram Description Part NumberConnection Drawing Technical Specifications Power
Related manuals
Manual 22 pages 63.06 Kb Manual 6 pages 14.6 Kb Manual 10 pages 13.12 Kb Manual 12 pages 33.3 Kb Manual 12 pages 16.52 Kb Manual 17 pages 54.12 Kb Manual 17 pages 50.34 Kb Manual 21 pages 39.46 Kb Manual 19 pages 53.54 Kb

DMX512 specifications

Chauvet DMX512 is a widely used standard in the lighting industry, particularly in theatrical productions, concerts, and events. This protocol facilitates communication between lighting consoles and various lighting fixtures, streamlining the control of lights in a synchronized manner. Understanding its core features, technologies, and characteristics can significantly enhance the capabilities of any lighting designer or technician.

One of the main features of DMX512 is its ability to control multiple devices from a single controller. This is achieved by using a daisy-chaining method where up to 512 channels can be managed over a single network. Each channel can control various parameters of a lighting fixture, such as intensity, color, and movement. The flexibility of DMX512 allows lighting designers to create intricate shows with seamless transitions and effects.

Another crucial aspect of DMX512 is its robust technology that includes differential signaling. This aids in reducing signal interference and ensures that signals can be transmitted over long distances, making it ideal for large venues. The standard operates at a speed of 250 kbaud, providing reliable and fast communication between devices.

Additionally, DMX512 employs a 3-pin or 5-pin XLR connector, commonly found in both commercial and professional lighting systems. This standardization allows for ease of setup and compatibility with various equipment, enhancing the versatility of different lighting rigs.

One of the defining characteristics of DMX512 is its backward compatibility with older lighting technologies, making it an excellent option for venues transitioning from analog to digital controls. Its widespread acceptance means that users can access a plethora of lighting equipment designed to interact with DMX512, ranging from simple par cans to sophisticated moving head fixtures.

Moreover, DMX512 supports a variety of fixture types, including LED lights, fog machines, and intelligent fixtures. This versatility equips lighting designers with a diverse toolbox for creating dynamic visual presentations that can adapt to the needs of their specific projects.

In summary, Chauvet DMX512 is an essential protocol for any lighting professional, offering a combination of extensive control, reliability, and flexibility. Its compatibility with numerous lighting devices, robust signal transmission capabilities, and widespread usage make it a cornerstone of modern lighting design, ensuring that creators can bring their artistic visions to life efficiently and effectively.