Figure 1- RCL-300A Components
SECTION 2- SEARCHLIGHT MOUNTING
Make sure the area is clean and dry. The searchlight can be mounted where desired, using appropriate length 5/16” diameter stainless steel fasteners. One set is provided in the mounting kit and four (4) nylon shoulder washers. The nylon washers prevent a galvanic reaction between the mounting hardware and the base of the searchlight. Be sure these washers have been inserted in the base mounting holes and that the mounting base gasket is securely in place before bolting down. Apply silicone grease to the bottom of the gasket to help in waterproofing the unit. When mounting, be sure the searchlight is able to rotate 360° without hitting any obstructions. For the drilling hole pattern, refer to the searchlight Mounting Template.
CAUTION: Do not mount the searchlight upside down. Moisture cannot drain from the inverted light head assembly.
4 |