Evaluation Board Software, Hardware Set-up Screen

Evaluation Board for Quad T1/E1 Applications — LXD386

4.5Evaluation Board Software

When operating the evaluation board in the software mode, the software provided with the kit will be used to configure the LXT386 and to monitor its operation. This software provides a point-and- click, user friendly interface with on-line help screens. Refer to the data sheet for detailed information about the LXT386 transceiver.

4.6Software Installation and Start-Up

The minimum PC system requirements are:

•IBM compatible PC

•386/40 MHz CPU (Pentium class recommended)

•Available serial port

•Mouse

•VGA monitor

•DOS version 5.0 or higher and Microsoft Windows 3.1 (Windows 9x recommended)

Begin the installation procedure by running the Setup.exe file on the installation diskette #1. Follow the on-screen prompts to complete the software installation.

4.7Hardware Set-up Screen

Whenever the LXT386 software is run, the Hardware Set-up screen will appear first on the monitor (see Figure 6). This screen is used to select the PC serial port to be used. Select an available serial port and click the OK button.

4.8Quitting the Program

The program can be terminated at any time by clicking the “Exit” control button, located at the right side of the screen.

Developer Manual