WS1EI & WS1.25EI Manual | Control Valve Function and Cycles of Operation • Page 2 |
The user can initiate manual regeneration. The user has the option to request the manual regeneration at the delayed regeneration time or to have the regeneration occur immediately:
1.Pressing and releasing the REGEN button. “▲ ” will flash towards Regen on the display and the regeneration will occur at the delayed regeneration time. The user can cancel the request by pressing and releasing the REGEN button.
2.Pressing and holding the REGEN button for approximately 3 seconds will immediately start the regeneration. The user cannot cancel this request, except by resetting the control by pressing NEXT and REGEN buttons simultaneously for 3 seconds.
For additional software features and specific setup refer to the 1.5 & 2L manual for this software.