Lowrance electronic X-48 Keyboard Basics, Pwr/Clear, Menu FWD / Menu REV, UP and Down Arrows

Page 18

KEYBOARD BASICS

The unit sounds a tone when you press any key. This tells you the unit has ac- cepted a command.

PWR/CLEAR

Use this key to turn the unit on. It also clears menu selections and the menus from the screen. This key also turns the unit off. NOTE: You must hold the OFF key

down for a few seconds in order to turn the unit OFF.

MENU FWD / MENU REV

These sonar units have many features that are accessed with the menu keys. The MENU FWD key moves forward through the menus, the MENU REV key moves backward. To see the first menu, simply press either MENU key. To see the other menus, press a MENU key repeatedly.

UP and DOWN ARROWS

Use these keys to adjust virtually every feature and function on the unit. NOTE: The up arrow key also stops the chart when no menus are displayed. In other words, anytime you wish to stop the chart, first make certain no menu is on the screen. Now press the up arrow key. The chart freezes and the word “STOP” appears at the top of the screen. To start the chart, press the up arrow key again.

DISPLAY - General

The lights flash for about ten seconds when the unit is turned on. Two menus appear, one after the other. The menus are the lights (BACK LIGHT) and a feet-meter selection (FEET/METER). To turn the lights on, press the up arrow key. To switch from feet to meters, press the down arrow key when the proper menu appears. The menus disappear after a few seconds. If you don’t want to wait, press the

PWR key to clear the menus from the screen.

When the sonar unit is first turned on, the display appears similar to the one at right. The unit is in the automatic mode and the Fish ID feature is off. The depth range shows on the left side of the screen. On the screen at right, the range is from 0 to 40 feet and the bottom depth is 29.4 feet.

16

Image 18
Contents Installation and Operation Instructions Table of Contents Specifications IntroductionTransducer Installation Location GeneralTransducer Assembly and Mounting All Units Shoot-thru-hull v.s. Transom MountingX-38 Only Ratchets Good Location Poor Location Poor Angle Page Trolling Motor Bracket Installation X-48 Only SHOOT-THRU-HULL Shoot-thru-hull Installation Fish Arches Power Connections All units Bracket Installation SPEED/TEMPERATURE Sensors ST-TBKSensor Chart Sensors in any other combina Tion Menu FWD / Menu REV Keyboard BasicsPWR/CLEAR UP and Down ArrowsOperation Menus AutomaticRange Zoom Zoom Automatic OperationZoom Manual Operation Range Upper and Lower Limits Sensitivity GraylineFish ID Feature Fish Track Target Track X-48 OnlyChart Speed Digital depth display are read from the center element onlyCHT 2 Chart #2 Display ModeCHT 1 Chart #1 OnlyX-48 only CHT 1 Chart #1 CHT 3 Chart #3X-48 only CHT 4 Chart #4 CHT 5 Chart #5Temperature Probe Select X-48 only DIG 2 Digital #2DIG 3 Digital #3 Alarms Fish Alarm Depth AlarmsShallow Alarm FEET/METER Deep AlarmLights Display ContrastASP Advanced Signal Processing SimulatorTroubleshooting Important Information Unit won’t turn onUnit freezes, locks up, or operates erratically No fish arches when the Fish ID feature is off Electrical Noise Lowrance Electronics Full ONE-YEAR Warranty Page International Customers Only Accessory Ordering InformationCanadian Customers Only Shipping InformationHow to Obtain Service U.S.A. Only

X-38, X-48 specifications

Lowrance has long been a trusted name in the world of fish finders and marine electronics, and the X-48 and X-38 models stand as prime examples of the brand's commitment to quality and innovation. These fish finders offer a range of features and technologies designed to enhance your fishing experience and improve your catch rate.

The Lowrance X-48 is equipped with a powerful 4000 watts peak-to-peak power output and 2400 watts RMS, providing exceptional depth capability and target separation. This model utilizes advanced sonar technology to deliver crisp and clear images of underwater structures, fish, and the bottom contour. The X-48 features a 5-inch monochrome display that provides high-resolution visuals, allowing anglers to identify fish and structures with ease.

One of the standout features of the X-48 is its ability to display detailed mapping data, which is essential for navigating unfamiliar waters. The built-in GPS and chart plotting capability allow users to create waypoints, track their movements, and return to productive fishing spots. This combination of sonar and navigation capabilities is invaluable for anglers who want to maximize their time on the water.

Similarly, the Lowrance X-38 offers an array of impressive features aimed at both novice and experienced fishermen. This model boasts a 3.5-inch monochrome display, which, despite its smaller size, provides users with excellent clarity and visibility. The X-38 employs a 2400 watts peak-to-peak power output, ensuring that even in deep water, fish can be detected with precision.

Both models utilize Lowrance's patented fish identification technology, which helps anglers quickly distinguish between species and understand fish behavior. This feature enhances the fishing experience, allowing users to make informed decisions about bait and tactics. Additionally, the X-38 and X-48 incorporate a user-friendly interface that facilitates easy operation, even for those who are new to fish finders.

Durability is another hallmark of Lowrance products. Both the X-48 and X-38 are designed to withstand harsh marine environments, ensuring that they function reliably season after season.

In conclusion, the Lowrance X-48 and X-38 models exemplify the cutting-edge technology and user-friendly design that the brand is known for. With their advanced sonar capabilities, detailed mapping features, and durable construction, these fish finders are essential tools for any angler looking to enhance their fishing adventures. Whether you are navigating familiar lakes or exploring new waters, the X-48 and X-38 provide the reliable performance needed to succeed.