Lowrance electronic X-48 only DIG 2 Digital #2, DIG 3 Digital #3, Temperature Probe Select

X-38 and X-48 ONLY (cont.)

DIG 2 (Digital #2)

Digital depth, water temperature, speed, and distance log (odometer) show on this page. To reset the log, turn the unit off and back on again.

DIG 3 (Digital #3)

Digital depth, water temperature, T-2 tem- perature, and T-3 temperature all show on this screen.

Temperature Probe Select

You can select the temperature probe's out- put that shows on Chart 2 and 4, when more than one temperature probe is connected to an X-38 or X-48.

To do this, press a MENU key until the "TEMP PROBE" menu appears as shown at right. Now press the up or down arrow keys until the desired probe appears. Press the PWR key to erase the menu.

28