SAVING AND LOADING DATA TO/FROM MEMORY CARDS
The following data can be saved to memory card:
•Mark/line
•Waypoints/routes
•Track
•Configration (menu settings)
2Saving Data to Memory Card
The memory card can save four items of data; track, mark/line, waypoint/route and configu- ration.
1 Formatting Memory Cards
Before you can use a memory card it must be formatted. Note that formatting always erases all saved data on the card!
1.Insert the memory card you want to for- mat into the slot.
2.Press the [MENU] key followed by the soft keys CONFIGRATION and UPLOAD/ DOWNLOAD DATA.
|
|
| SAVE | |
sTRACK | OFF | |||
DATA | ||||
MARK/LINE | OFF | EDIT |
| WAYPOINT/ROUTE | OFF | SAVE | ||
| DATA | ||||
|
|
|
|
| |
| CONFIGURATION | OFF |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FORMAT |
|
|
|
|
|
|
|
|
|
|
|
|
DGPS 3D |
|
|
| RETURN | |
SAVE DATA display
3.Press the soft key SAVE DATA TO MEMORY CARD and the soft key FOR- MAT. You are asked if you are ready to format the memory card.
4.Press the [ENTER] key to format (or press the [CLEAR] key to escape). Now FOR- MATTING MEMORY CARD appears. Do not remove the card while it is being for- matting. When the formatting is com- pleted, FORMAT COMPLETED appears.
5.Press the [ENTER] key to finish. Now you can record data to the memory card.
Saving data
1.Insert a formatted memory card into the slot.
2.Press the [MENU] key followed by the soft keys CONFIGURATION and UPLOAD/ DOWNLOAD DATA.
3.Press the soft key labeled SAVE DATA TO MEMORY CARD. The SAVE DATA display appears.
4.Press ▲ or ▼ to select item to save.
5.Press the soft key EDIT to open the
TRACK, MARK/LINE, WAYPOINTS/ ROUTES or CONFIGRATION window.
6.Press ▲ to select ON.
7.Press the soft key ENTER or the [ENTER] key.
8.Repeat from steps 4 to 7 to save other data if desired.
9.Press the soft key SAVE DATA. The fol- lowing message appears and saving starts. Do not remove the memory card while data is being saved.
NOW SAVING DATA TO
MEMORY CARD. DO NOT
TURN OFF THE POWER UNTIL
SAVING COMPLETED.
SAVE DATA message
When saving is completed, COM- PLETE SAVING DATA appears.
10.Press the [ENTER] key.
8