Furuno GP-185F Returning Own Ship to Screen Center, Changing the Plot Interval, Entering Mark

Page 2

Returning Own Ship to Screen Center

Press the soft key CENTER.

Changing the Plot Interval

1.Press the [MENU] key to show the main menu.

2.Press the soft key CHART SETUP OPTIONS to show the chart setup options menu.

CHART

SETUP

CHART OFFSET

TRACK CONTROL

CHART DETAILS

 

 

RETURN

DGPS 3D

 

 

 

 

3.Press the soft key TRACK CON- TROL.

4.Press ▲ or ▼ to select TIME INTERVAL or

DIST INTERVAL.

5.Press the soft key EDIT.

6.Key in the interval desired.

Entering Mark

1.Press the [MENU] key and the soft key DIS-

PLAY OPTIONS.

2.Press ▼ to select OPERATION MODE.

3.Press the soft key EDIT.

4.Press ▼ to select FISHING.

5.Press the soft key ENTER or the [ENTER] key.

6.Press the PLOT key to display the plotter display.

7.Press the [HIDE/SHOW] key to display the soft key MARK ENTRY.

8.Press the soft key MARK ENTRY.

When the cursor is displayed, a mark which its shape and color are presetted is entered to cursor position. When the cursor is not dis- played, a mark is entered to own ship position. The mark attributes can be changed by the soft key MARK EDIT.

Stopping, Restarting Recording of Track

1.Press the [MENU] key.

2.Press the soft key CHART SETUP OP-

TIONS.

3.Press the soft key TRACK CONTROL.

4.Press the soft key STOP TRACK. NOT TRACKING indication appears at the bottom of the display.

To restart recording, press the soft key START TRACK.

Entering Waypoints at Own Ship Position

Press the [SAVE/MOB] key with a touch-and- release action.

Entering Waypoints By Cursor

1.Press the [WPT/RTE] key.

2.Press the soft key WAYPOINTS.

3.Press the soft key WAYPOINT BY CURSOR to show the plotter display.

4.Operate the cursor to place the cursor on the position you want to enter the waypoint.

5.Press the soft key NEW WPT.

6.Press the soft key SAVE.

Registering Routes

1.Press the [WPT/RTE] key.

2.Press the soft key ROUTES.

3.Press the soft key NEW ROUTE.

4.Press the soft key LOCAL LIST or ALPHA LIST.

5.Press ▲ or ▼ to select a waypoint.

6.Press the soft key ADD WPT.

7.Repeat step 5-7.

8.Press the soft key SAVE.

2

Image 2
Contents Displaying Electronic Chart at Power Up Turning the Power On/OffAdjusting Tone Brilliance Changing Chart ScaleEntering Mark Returning Own Ship to Screen CenterChanging the Plot Interval Stopping, Restarting Recording of TrackSetting Arrival Alarm Setting Destination by Waypoint NumberCancelling Destination Selecting the Sounder Display ModeSuppressing Low Level Noise Activating Sounder AlarmsManual Sounder Operation Suppressing Interference