RS2058 EN_Sirius 8/5/06 10:55 AM Page 21
Radio
Selecting Tuner Band
1.Press SOURCE to enter Tuner mode.
2.Press BAND to select between FM or AM Radio band.
Tips:
Your audio system has 32 preset stations.
Tuning to a Station
Press |
|
| or |
| to select frequencies. Press | |
|
| |||||
and hold |
| or |
| to scan frequecies. | ||
|
|
Auto Preset Programming | EN |
(FM only) |
|
|
Press and hold the BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
Auto Prog 87.50MHz
Using Presets
The tuner can be in either TUNE or PRESET mode.
•Press TUNE MODE to toggle TUNE and PRESET mode.
• Press |
| or |
| to access the previous or |
|
| |||
next preset station. |
|
Preset 01
87.50MHz
Tips: |
|
Under PRESET mode, press | or |
can only access the preset stations. Manually tuning is not accessible in this mode.
Manually Setting Presets
1. Press TUNE MODE to enter TUNE mode.
2. Press |
|
| or |
| to access the desired |
|
| ||||
frequency. |
|
|
|
3.Press the PROG button once and the most recently accessed program location flashes on the display.
Preset 2 90.50MHz
4. If a different program location is preferred,
press or to move to the desired preset number
5.Press PROG to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and stereo mode. (Remote Only) “STEREO” is displayed in stereo mode.
14