Fusion Comprehensive Installation Instructions for IP600 and AV600 Marine GPS Systems
Page 6

004 INSTALLATION

INSTALLATION

IF ANY MODIFICATION TO THE VESSEL IS REQUIRED, SUCH AS DRILLING HOLES ETC FUSION RECOMMENDS CONSULTATION WITH YOUR BOAT DEALER OR MANUFACTURER BEFOREHAND.

MENU STRUCTURE

ROOT MENU

017 MENU STRUCTURE

»Remove the Sun Cover from the unit

»Fit mounting gasket

»Insert the unit into the mounting hole

»Pull down the front face to expose the mounting screw locations.

Mounting Gasket

»Use either the supplied 4 x wood screws, or 4 x machined screws and metal clamps to affix the unit into position.

»The unit must be mounted within 30 degrees of the horizontal plane.

Note: In some circumstances a back strap or brace may be required at the rear of the Unit (Back Strap / brace is not included).

Appropriate mounting is very important to ensure correct operation. Select a location that allows both free/open airflow around rear of chassis, whilst minimizing exposure to moisture. Allow adequate room at the rear of the unit for the cable looms (approx 2-3”).

ELECTRICAL WIRING

Caution: The MS-IP600, MS-CD600 and MS-AV600 are designed for vessels with a 12V DC Negative ground electrical system

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Marine Stereo Handling Compact Discs CD/CD-R/CD-RW FCC Compliance StatementBefore Inserting Ipod MS-IP600 Playback of CD-R/CD-RW Specifications and Licensing Contents Marine Wired Remote Marine Zone AmplifierFORWARD/NEXT RadioBACK/PREVIOUS PLAY/PAUSEMenu Structure InstallationElectrical Wiring Root MenuLineout Zone SetupConnections Description Colour Zone ConnectionsMS-AV600 IR Remote Operation DVD Operation General OperationOperation PresetsRadio Operation S.TActivating Your Sirius Tuner Parental ModeSirius Satellite Radio Repeat / ShuffleCD/MP3 Operation AUX Operation
Top Page Image Contents