Fusion Official Guide to Marine GPS System Features and Operations

016 ZONE OPERATION

ZONE OPERATION

The FUSION Marine Stereo makes it possible to have 3 ‘Zones’, that have independent volume control.

Zone 1 and 2 are powered and can be linked, Zone 3 requires a FUSION Marine Amplifier. All Zones have adjustable volume limits. Note: If the Zone is selected as ‘Off ’ The features are not available.

LINEOUT

Lineout gives you the ability to connect a FUSION Marine Amplifier. Note: The lineout can independently be assigned to Zone 1, 2 or 3.

Press the ‘Menu’ button and select ‘Zones’. Select ‘Lineout’. Select the Zone you are assigning to the Lineout.

CONNECTIONS

DESCRIPTION	COLOUR	ZONE	CONNECTIONS
Battery +12VDC	Yellow	Zone 1	White = Speaker Left Positive
Accessory +12V switched	Red
			White / Black = Speaker Left Negative
Negative Ground	Black
			Grey = Speaker Right Positive
Remote Amplifier Turn On	Blue/White
			Grey/ Black = Speaker Right Negative
Refer to the wiring diagram for reference (pg 6)

005 CONNECTIONS

ZONE SETUP

Press the ‘Menu’ button and select ‘Zones’. Select the Zone you wish to setup.

ZONE ON/OFF

Select ‘On’ if Zones are present on the vessel.

Note: Zone 1 cannot be turned OFF

VOLUME LIMIT

Select ‘Volume Limit’ to set the desired maximum output volume for each individual Zone.

LINK ZONE 1 + 2

Allows the volume control to operate Zones 1 + 2 as a combined pair. The Zone set up for Zone 1 and 2 can be configured separately when in this mode.

Press the ‘Menu’ button and select ‘Zones’. Select ‘Zone 1’ then ‘Link Zone 1 + 2’. Select ‘On’ to activate this feature.

SUBWOOFER

Change the assigned zone of the subwoofer. Also adjust the sub level and filter.

SUBOUT ZONE

Press the ‘Menu’ button and select ‘Zones’. Select ‘Subwoofer’ then ‘Subout Zone’. Select the desired subwoofer zone.

Note: The subwoofer can independently be assigned to Zone 1, 2 or 3.

SUB FILTER

Press the ‘Menu’ button and select ‘Zones’. Select ‘Subwoofer’ then ‘Sub Filter’. Select the desired frequency.

SUB LIMIT

Press the ‘Menu’ button and select ‘Zones’. Select ‘Subwoofer’ then ‘Sub Limit’. Select the desired maximum subwoofer output volume.

Note: Press and Hold the ‘Rotary Encoder’ for quick access to subwoofer level adjustment

Note: The +12V switched and +12V battery can be joined for some	Zone 2	Green = Speaker Left Positive
installation requirements.
		Green / Black = Speaker Left Negative
ANTENNA CONNECTION		Purple = Speaker Right Positive
Connect an AM/FM marine antenna.		Purple / Black = Speaker Right Negative
AUX INPUT	Note: Speaker connection (2 Ohm Stereo minimum). 2 pairs of 4 Ohm
Connect an Auxiliary source to the left and right RCA	speakers per channel can be connected in parallel to achieve 2 Ohm
(White = L, Red = R).	configuration.
iPod CONNECTION (MS-CD600 and MS-AV600 only)	Zone 3/Lineout	Low level output
		(For connection to external amplifier)
Connect the 1.5m iPod accessories lead MS-IP15L (not included), or
		White RCA= Left Output
connect the MS-IPDOCK (not included)
		Red RCA = Right Output
SIRIUS SATELLITE RADIO (For use in USA only)
		Orange RCA= Subwoofer Output
Connect to SiriusConnect™ tuner (not included)	Note: Line Output / Sub can both be independently assigned to Zone 1,
WIRED REMOTE (MS-WR600)
	Zone 2 or as a unique Zone 3.
Connect a marine wired remote to the CANbus system connector.
Up to 3 remotes can be connected to the system.

VIDEO CONNECTION (MS-AV600)

Connect the composite video or the S-Video output to a TV / LCD monitor.