ACR Electronics Y1-03-0250, RLB-38 manual False alarms

Page 15

5.False alarms

To prevent false alarms, it is important to be aware of how your beacon can be activated. An ACR 406 MHz EPIRB can be activated by two different methods. Whether you have a Category I or Category II, these methods are the same.

//When the beacon is out of its bracket and wet, the unit will start transmitting

//When the switch is moved to the “ON” position, in or out of the bracket, the unit will start transmitting

Precautions to prevent false alarms

//Do not mount or transport the beacon within 4.6 ft/1.4 m of a magnetic source.

//Do not store the beacon outside of its bracket if it can get wet.

//Do not mount the EPIRB backwards in its bracket (lanyard roll must face in).

//Do not clean the beacon with a water hose and brush while out of its bracket.

Reporting

Should there be, for any reason, an inadvertent activation or false alarm, it must be reported to the nearest search and rescue authorities. The information that should be reported includes:

//The EPIRB 15-digit Unique Identifier Number (UIN)

//Time and date

//Duration and cause of activation

//Location of beacon at the time of activation

To report false alarms in the United States, contact any of the following:

US Region

Telephone Number

 

 

 

 

Atlantic Ocean / Gulf of Mexico

(757) 398-6390

 

USCG Atlantic Area Command Center

 

 

 

 

 

 

Pacific Ocean Area /

(510) 437-3700

 

USCG Area Command Center

 

 

 

 

 

 

USCG HQ Command Center

(800) 323-7233

 

 

 

 

To report false alarms outside of the USA, contact the national authority where your beacon is registered.

Y1-03-0250 Rev. B

14

Image 15
Contents Owner Vessel Radio Call Sign UIN # Page Table of Contents Appendix D WARRANTY, Useful Life POLICY, NoticesStep ONE Registering Your Beacon Suitland Road Suitland, MD What country should I register in?How do I register? Noaa Sarsat Beacon RegistrationDo I need a radio license? How your beacon brings help Step TWO HOW the Beacon WorksOptional External GPS interface Anatomy of your beacon Activation switch with Witness TabTop View Switch PositionsCategory 2 QuickDraw Bracket Category 1 SeaShelter3 BracketActivating your beacon Y1-03-0250 Rev. B Witness tab will break once placed in the on position Turning off the beacon Tips for Optimum Deployment of AN Activated BeaconFalse alarms Date of Installation Example Step Three Installing the BeaconPage Category I bracket Category II bracket Installing the Optional optical GPS interface cable On a routine basis aboard ship, do Routine beacon maintenanceBattery replacement Step Four Maintaining the BeaconY1-03-0250 Rev. B Servicing the SeaShelter3 and the HydroFix HRU Changing ownership or contact informationTo remove the expired HRU To install the new HRUServicing the QuickDraw Self-Testing the beaconHow the external GPS interface works Appendix a Using and Testing the GPS SystemsUsing the external GPS interface Testing the external GPS interfaceCompatible GPS receivers LED indication of GPS fixGeneral overview Appendix B the COSPAS-SARSAT SystemGENERAL/ Environmental Appendix C Technical SpecificationsLimited Warranty Appendix D WARRANTY, Useful Life POLICY, NoticesProduct EC Declaration of Conformity