ACR Electronics RLB-38, Y1-03-0250 manual

Page 2

CAUTION: Before proceeding to install, test or use your new ACR Electronics’ product, please read this Product Support Manual in its entirety.

If you have questions regarding the contents of the manual, please contact our Technical Service Department at ACR Electronics, Inc., Telephone +1 (954) 981- 3333. Please be ready to provide the technician with the page number you wish to discuss. If you have a question that is not covered in the manual, please visit our website and access the Frequently Asked Questions (FAQs) section for further information or call our Technical Service Department. The website address is www.acrelectronics.com. If in the future you lose this manual, you may access and print a replacement on the ACR website.

NOTE re: Applicable products

This manual supports all configurations of Satellite3 406™/ RLB-38 beacons. In addition to the part numbers listed on the cover page, other configurations of these products are available, thus you may have purchased a product configuration with a somewhat different part number. As long as the first four digits are the same as one of the two part numbers on the cover, this manual is applicable.

Y1-03-0250 Rev. B

1

Image 2

Contents Owner Vessel Radio Call Sign UIN # Page Appendix D WARRANTY, Useful Life POLICY, Notices Table of ContentsStep ONE Registering Your Beacon Noaa Sarsat Beacon Registration What country should I register in?How do I register? Suitland Road Suitland, MDDo I need a radio license? Step TWO HOW the Beacon Works How your beacon brings helpAnatomy of your beacon Activation switch with Witness Tab Optional External GPS interfaceSwitch Positions Top ViewCategory 1 SeaShelter3 Bracket Category 2 QuickDraw BracketActivating your beacon Y1-03-0250 Rev. B Witness tab will break once placed in the on position Tips for Optimum Deployment of AN Activated Beacon Turning off the beaconFalse alarms Step Three Installing the Beacon Date of Installation ExamplePage Category I bracket Category II bracket Installing the Optional optical GPS interface cable Step Four Maintaining the Beacon Routine beacon maintenanceBattery replacement On a routine basis aboard ship, doY1-03-0250 Rev. B Changing ownership or contact information Servicing the SeaShelter3 and the HydroFix HRUTo install the new HRU To remove the expired HRUSelf-Testing the beacon Servicing the QuickDrawTesting the external GPS interface Appendix a Using and Testing the GPS SystemsUsing the external GPS interface How the external GPS interface worksLED indication of GPS fix Compatible GPS receiversAppendix B the COSPAS-SARSAT System General overviewAppendix C Technical Specifications GENERAL/ EnvironmentalAppendix D WARRANTY, Useful Life POLICY, Notices Limited WarrantyEC Declaration of Conformity Product