Ground the Generator, Verify Oil Level

Step 3 - Ground the Generator

Failure to properly ground this generator can result in electrocution.

Ground this generator by tightening the grounding nut against a grounding wire as illustrated in Figure 3. A No. 12 AWG (American Wire Gauge) stranded copper wire is generally an acceptable grounding wire. The other end of this grounding wire should be connected to a copper or brass grounding rod that is driven into the earth.

Grounding codes can vary by location. Contact a local electrician for information on grounding regulations for your area.

Figure 3 - Attaching the Grounding Wire to this Generator

Subsequent Use of this Generator

For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation.

IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual. If not, review this section now.

Step 1 - Verify Oil Level

Even though this generator is equipped with an automatic shutoff to protect it from damage due to low oil, it is important to check the oil level in the engine crankcase before each use to ensure that there is sufficient quantity.

1.Verify that this generator is on a level surface.

2.Unscrew the oil filler/dipstick cap from the engine.

3.With a dry cloth, wipe the oil off of the dipstick that is located on the inside of the cap.

4.Fully insert the dipstick without screwing the filler/dipstick cap and then remove again. There should be oil on the dipstick. If there is no oil on the dipstick, or oil is visible only at the very end of the dipstick, add oil until the engine crankcase is filled. (See “Changing/Adding Oil” in the “Maintenance/Care” section of this manual).

5.Confirm that the oil filler/dipstick cap is properly screwed in place when finished verifying the oil level.

NOTE: The oil capacity for this ACDelco Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator is 20 fluid oz (0.6 L).

Model AC-G0002 Oil Capacity (fluid oz./L)	20 / 0.6
Model AC-G0002 Oil Type Recommended	SAE-30

Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator

AC-G0002 specifications

The ACDelco AC-G0002 is an advanced automotive air conditioning compressor designed to deliver optimal performance and efficiency in various vehicle applications. As a product of ACDelco, a brand known for its commitment to quality and reliability, the AC-G0002 stands out in the marketplace for its cutting-edge features and innovative technologies.

One of the main features of the ACDelco AC-G0002 is its high-quality construction, which ensures durability and longevity. Built with robust materials, this compressor is engineered to withstand the rigors of diverse driving conditions and is resistant to wear and tear, ensuring that it can provide consistent performance over time. Additionally, the AC-G0002 undergoes rigorous testing for vibration, noise, and performance, allowing it to meet or exceed industry standards for automotive components.

The AC-G0002 also utilizes advanced technologies to enhance its cooling capacity. It employs a high-efficiency scroll design that maximizes airflow while minimizing energy consumption. This innovative design not only improves the cooling performance but also contributes to better fuel efficiency, making it an environmentally friendly option for automotive air conditioning systems.

Another key characteristic of the ACDelco AC-G0002 is its compatibility with a wide range of vehicles. It is designed to fit various models, making it an ideal choice for automotive technicians and DIY enthusiasts looking for a reliable replacement compressor. The unit often comes with pre-installed components, such as the clutch and pulley, simplifying installation and reducing additional parts procurement.

Furthermore, the ACDelco AC-G0002 features an integrated thermal sensor that monitors the temperature of the refrigerant. This real-time data allows the system to optimize its performance, ensuring that the cabin remains comfortable regardless of external weather conditions. The smart technology employed in this compressor helps prevent overcooling and maintains the system’s efficiency.

In conclusion, the ACDelco AC-G0002 is more than just an air conditioning compressor; it is a testament to ACDelco’s dedication to providing high-performance automotive solutions. With its durable construction, efficient cooling technology, compatibility, and intelligent features, the AC-G0002 offers a reliable replacement option for those seeking to maintain or upgrade their vehicle’s air conditioning system. Whether in extreme heat or cold, this compressor ensures that drivers and passengers enjoy a comfortable ride.