ACDelco AC-G0002 instruction manual Cleaning the Generator, Checking the Oil Level

Page 20

Cleaning the Generator

Always try to use this generator in a cool dry place. If this generator becomes dirty, the exterior can be cleaned with a damp cloth, soft brush, vacuum and/or pressurized air.

Never clean this generator with a bucket of water and/or a hose as water can get inside and cause a short circuit or corrosion.

Never use gasoline to clean parts of this generator.

Checking the Oil Level

Even though this generator is equipped with an automatic shutoff to protect it from damage due to low oil, it is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity.

To check the oil level:

1.Verify that this generator is shut down and on a level surface.

2.Unscrew the oil filler/dipstick cap from the engine as illustrated in Figure 11.

3.With a dry cloth, wipe the oil off of the dipstick that is located on the inside of the cap.

4.Insert the dipstick as if replacing the cap and then remove again. There should be oil on the dipstick. If there is no oil on the dipstick, or oil is visible only at the very end of the dipstick, add oil until the engine crankcase is filled (see “Changing/Adding Oil” in this section of this manual).

5.Confirm that the oil filler/dipstick cap is properly in place when finished verifying the oil level.

Figure 11 - Checking the Oil

Changing/Adding Oil

The oil level in this generator should be checked before each use. (See Figure 10.) When the oil level is low, add oil until the level is sufficient to operate this generator.

The oil capacity for this ACDelco Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator engine is 20 fluid oz. (0.6 L).

To drain the oil from this generator:

It is necessary to drain the oil from the crankcase only if it has become contaminated with water and/or dirt.

1.Place a bucket underneath this generator to catch oil as it drains.

2.Using a 10 mm hex wrench, unscrew the oil drain plug located on the crankcase underneath the oil filler/dipstick cap as illustrated in Figure 12.

3.Allow all the oil to drain from this generator.

4.Replace the oil drain plug and tighten with a 10 mm hex wrench.

Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator

20

Image 20
Contents Portable Generator Features Table of Contents Recognize Safety SYMBOLS, Words and Labels Important Safety Instructions Legal RequirementsPage Page Page Package Contents Generator Components Add Oil Using this Generator for the First-TimePreparing the Generator for USE Add Gasoline Verify Oil Level Ground the GeneratorSubsequent Use of this Generator Starting the Generator Verify Gas LevelUsing the Generator AC UsageEstimated wattage requirements for common electrical devices Do not connect 50Hz or 3-phase loads to this generator Some Notes about Power Cords DC UsageStopping the Generator MAINTENANCE/CARERecommended Maintenance Schedule Cleaning the Generator Checking the Oil LevelAir Filter Maintenance Draining OilFuel Filter Cup Cleaning Spark Plug MaintenanceEmptying the Fuel Tank F6TCSTORAGE/TRANSPORT Procedures Storage TimeTroubleshooting Specifications AC OutputModel AC-G0002 3500 Exploded View and Parts List Parts List Part Qty DescriptionPage Page Warranty RegistrationPortability KIT Installation StepPage Page AC-G0002-0908
Related manuals
Manual 36 pages 39.43 Kb

AC-G0002 specifications

The ACDelco AC-G0002 is an advanced automotive air conditioning compressor designed to deliver optimal performance and efficiency in various vehicle applications. As a product of ACDelco, a brand known for its commitment to quality and reliability, the AC-G0002 stands out in the marketplace for its cutting-edge features and innovative technologies.

One of the main features of the ACDelco AC-G0002 is its high-quality construction, which ensures durability and longevity. Built with robust materials, this compressor is engineered to withstand the rigors of diverse driving conditions and is resistant to wear and tear, ensuring that it can provide consistent performance over time. Additionally, the AC-G0002 undergoes rigorous testing for vibration, noise, and performance, allowing it to meet or exceed industry standards for automotive components.

The AC-G0002 also utilizes advanced technologies to enhance its cooling capacity. It employs a high-efficiency scroll design that maximizes airflow while minimizing energy consumption. This innovative design not only improves the cooling performance but also contributes to better fuel efficiency, making it an environmentally friendly option for automotive air conditioning systems.

Another key characteristic of the ACDelco AC-G0002 is its compatibility with a wide range of vehicles. It is designed to fit various models, making it an ideal choice for automotive technicians and DIY enthusiasts looking for a reliable replacement compressor. The unit often comes with pre-installed components, such as the clutch and pulley, simplifying installation and reducing additional parts procurement.

Furthermore, the ACDelco AC-G0002 features an integrated thermal sensor that monitors the temperature of the refrigerant. This real-time data allows the system to optimize its performance, ensuring that the cabin remains comfortable regardless of external weather conditions. The smart technology employed in this compressor helps prevent overcooling and maintains the system’s efficiency.

In conclusion, the ACDelco AC-G0002 is more than just an air conditioning compressor; it is a testament to ACDelco’s dedication to providing high-performance automotive solutions. With its durable construction, efficient cooling technology, compatibility, and intelligent features, the AC-G0002 offers a reliable replacement option for those seeking to maintain or upgrade their vehicle’s air conditioning system. Whether in extreme heat or cold, this compressor ensures that drivers and passengers enjoy a comfortable ride.