5.Press OK to display the available settings.
6.Use the up/down navigation keys to select a setting (Fig. 76).
7.Use the up/down navigation keys to highlight √ and press OK.
Setting the WAAS/EGNOS
To enable/disable the WAAS/EGNOS feature:
1.Press the Menu button twice to display the main menu.
2.Select User Settings and press OK.
3.Select the Set 2 tab using the left/right navigation keys.
4.Use the up/down navigation keys to highlight the WAAS/EGNOS option.
5.Press OK to display the available settings.
6.Use the up/down navigation keys to select On or Off (Fig. 77).
7.Use the up/down navigation keys to highlight √ and press OK.
Setting the Backlight
The backlight can be set to always remain on, or turn off after 30 seconds, 3 minutes, or 10 minutes. The more you use the Backlight, the faster the batteries will drain. When the Backlight goes out, press any key to turn it on again.
To set the Backlight:
1.Press the Menu button twice to display the main menu.
2.Select User Settings and press OK.
3.Select the Set 3 tab using the left/right navigation keys.
4.Use the up/down navigation keys to highlight the Backlight option.
5.Press OK to display the available settings.
6.Use the up/down navigation keys to select a
Fig. 77
Fig. 78
41