available. Create a route as follows:
i. Click New under Route to create a new route. Modify the route name if desired in the Name filed.
ii.Select a waypoint from the waypoint list and click Add to add it to the route. Repeat as required.
iii.Click Set Navi to create the route and display it on the map.
•Geocaching – Click
to | create | or | open |
a | geocaching | file. | |
You | are | prompted | |
to specify | the | file in | |
which you want to save the geocaching file. Click OPEN to use an existing file or CREATE to open a new file.
Specify the location to save the geocaching file and click Save. A dialog for a new box pops up. Enter information such as the name of the box and comments for the box. If required, edit the
latitude and longitude of the box to get an accurate location. You can also establish a new box point by importing a (*.loc) file from the Internet.
•Metric System – Click to set the measurement units on the map to the metric system. Distances are shown in meters (m) or kilometers (km). If not enabled, distances are shown in miles (mi).
List Menu
The List menu enables you to merge map card files (*.ard) and create a list map file (*.arl).
Follow these steps to use this menu:
1.Click File Open to open a map file.
2.Click List Add An Item to add the file to the list. The selected item is displayed in the left pane of the program window.
3.Repeat the first two steps to add the required maps. The file list in the left pane shows all the component map card files and their size. The total file size is displayed in the lower left corner.
4.After adding all the required files, a map list file (*.arl) is created.
Transfer Menu
The transfer menu enables you to transfer data such as maps, trail logs, and waypoints and routes between the ONIX 110 and your host PC.
20