Function | LED Behavior | Description | |
Subwoofer Levels | Two center LEDs | Press the Next/Previous button to increase/decrease the level of the subwoofer. | |
|
| indicate Subwoofer | The LED indicators will move to the right with increasing levels and to the left |
Subwoofer |
| level 0. | with decreasing levels. |
DTS TruSurround | Surround On: | Press the Next/Previous button to enable/disable DTS TruSurround. When | |
On/Off |
|
| enabled (On), all inputs will produce virtual surround sound. When disabled |
Surnd |
| Surround Off: | (Off), all sources will playback in 2.1 stereo. |
|
|
| |
DTS TruVolume | TruVolume On: | Press the Next/Previous button to enable/disable TruVolume. When enabled | |
On/Off |
| TruVolume Off: | (On),TruVolume provides a consistent and comfortable volume level for a more |
TruVol |
| enjoyable listening experience. | |
|
|
| |
Night Mode On/Off | Night Mode On: | Press the Next/Previous button to enable/disable Night Mode. When enabled | |
Night |
|
| (On), the Sound Bar will lower bass frequency levels to provide a more quiet |
| Night Mode Off: | environment (ideal for apartment living and homes with sleeping children). | |
TV Remote | TV Remote On: | Press the Next/Previous button to enable/disable VIZIO TV Remotes. When | |
VZtv Rmt | On |
| enabled (On), you can use a VIZIO TV remote control to turn on the Sound Bar |
TV Remote Off: | (using the TV Volume Up button) and control volume. | ||
Eco Power On/Off | Eco Power On: | Press the Next/Previous button to enable/disable Eco Power Mode. When enabled | |
EcoPwr | On |
| (On), the Sound Bar will go into standby after a period of inactivity.The sound bar |
Eco Power Off: | will automatically turn off when no audio signal is detected. Off disables this feature. | ||
|
|
| Note: Enable this function if using a TV remote to control the sound bar. |
Program Remote | Press the Next/Previous and Play buttons to toggle and select and program | ||
Prg Remote | your TV remote to control the Volume Down, Volume Up, and Mute functions on | ||
| your Sound Bar. See “Program Remote” on page 16 for more information. | ||
Reset |
| Press the Next/Previous and Play buttons to select and reset your remote and | |
Reset | No | Sound Bar to the factory default settings. All paired Bluetooth devices will be | |
| unpaired. All programmed IR remotes will also be removed. See “Reset to Factory | ||
|
|
| Default Settings” on page 17 for more information. |
15