When a Machine Preset is loaded, the selected machine is highlighted in the Configuration icon, and three of the loaded preset’s parameters appear at the bottom of the Display.
0:Med Hall | 48 |
|
1:PreDelay :14ms 2:MidRTReverbTime :1.59s 3:RvbOutFreq :4750.0Hz
Configuration Icon
(Machine Preset)
Press the Machine button repeatedly to cycle through the virtual machines in a System Preset, and eventually back to the System Preset.
Editing a Preset
To edit a System Preset, you must edit the virtual machines within it. Press the Machine button to cycle through the virtual machines within a System Preset.
Each virtual machine contains a set of parameters that you can edit and adjust. When a virtual machine is selected, three of its parameters appear at the bottom of the Display. Adjust the first parameter with Knob A, the sec- ond parameter with Knob B, and the third parameter with Knob C. To see the next set of parameters you can adjust, press Knob A.
| 0:Med Hall | 48 | |
|
| ||
|
| 1:PreDelay | :14ms |
|
| 2:MidRT | :1.59s |
|
| ||
|
| 3:RvbOutFreq | :4750.0Hz |
|
|
|
|
|
|
|
|
Soft Row Parameters
Each virtual machine has 8 parameters you can adjust this way. All presets have more than 8 parameters, but only 8 can be edited via the A, B, and C knobs in this fashion. You can choose which parameters are in the list by using the Soft Row Setup menu located in the Machine menu (see page 21 for more information).
11