Pot Control Area, QuickMix Area

Mackie TT24 Digital Live Console Quickstart Guide	TT24 Interface

2.3V-Pot Control Area

The buttons to the right of the channel faders (Figure 2-2) selects the current function for the channel V-Pots from the following:

•PAN: Left/Right and LCR panning control

•TRIM: Digital Trim has a range of ±15 dB

•METERS: High-resolution channel metering. Push the V-Pot and the meter reverses to display compressor gain reduction. Rotate the knob to control the threshold settings.

•HPF: Push the V-Pot to engage/disengage the HPF; rotate the knob to ad- just frequency between 20–400 Hz.

•AUX SENDS 1–12: Rotate the V-Pot to control send level; push the V-Pot to toggle pre/post fader for that send.

•AUX PAN: Control panning of stereo linked axes

•AUX MODE: Aux mode is the only blue button on the console and effectively turns the TT24 into a powerful, dedicated monitor mixer by providing aux mixing on the faders. In this mode, the 24 channel faders act as channel aux sends and the 4 group faders act as auxiliary master sends.

2.4QuickMix Area

The upper-right of the console, below the 5.5-inch Touchscreen, is called the QuickMix area (Figure 2-3). It consists of 12 push-button rotary encoders and eight buttons, which provide fast navigation of the QuickMix section

It is important to note:

•The only adjustable controls on the Touchscreen are buttons that toggle a value on/off. All knobs represented on the Touchscreen are controlled by corresponding QuickMix knobs. If any of the 12 knobs are missing from the Touchscreen, the corresponding QuickMix knob has no function.

•Any Touchscreen knob colored white instead of black denotes a dual func- tion available by pushing the corresponding QuickMix knob. This function varies with the control.