Mackie Official Manual for TT24 Digital Live Console and Quickstart Features

Mackie TT24 Digital Live Console Quickstart Guide TT24 Interface

2.5Snapshots

The TT24 includes a robust snapshot feature that captures the state of the console:

•99 snapshots

•fast store/recall surface control

•detailed snapshot filtering to store/recall only selected parameters and channels

The snapshot controls are in the upper-right area beside the QuickMix buttons (Figure 2-3).

2.6Flex Groups and Master

The TT24 has four Group channel strips and a master strip (Figure 2-2). Each Group has a V-Pot (to control group pan), MUTE, SELECT, SOLO buttons, and a 100 mm motorized fader on the console surface. The four Group strips control either Groups 1–4 or 5–8. The currently selected Group bank is indicated by the GROUP ASSIGN/SELECT buttons.

Changing the Group Bank

Press any of the GROUP ASSIGN/SELECT buttons to select that Group bank. The GROUP ASSIGN/SELECT buttons illuminate 1–4 or 5–8 and cause the faders and buttons to snap to their previous Group bank settings.

Group Assignment

Press and hold a GROUP ASSIGN/SELECT button and press the channel SELECT buttons to add/subtract channels from that Group. This method is used for all of the GROUP ASSIGN/SELECT buttons (Groups 1–8, L-R and CTR/Mono).

Group Parameter Control

Press a GROUP SELECT button to access that Group’s settings and controls in the QuickMix section just like an input channel.

16