PARAMETERS
Adjusting several taps:
When you would like to adjust e.g. the Level or the Pan or Feedback for several taps, you
can use the Crosshair 
or the Freehand 
drawing tools in the area where the parameter values are displayed.
When you select the Crosshair tool 
, you can draw in straight lines while pressing the left mouse button. This is an excellent tool e.g. for creating a smooth
The freehand tool 
only changes the value of the bar it currently touches.
We suggest you try out both tools and get comfortable with this intuitive way of entering values.
Parameter Page Examples
Level page: | Pan page: |
Feedback page: | Shade page: |
PARAMETERS
Phase page:
14 – Tap select
There are 24 Direct Tap select buttons representing the 24 taps. You can also select a tap simply by grabbing the tap in the grid.
15 – Selection Tabs for Parameter Pages
Although all delay tap parameters can be set using the six parameter knobs, you will get a better overview for each parameter category by selecting the parameter pages. To select the page for a parameter (e.g. Pan), press the associated page tab right below the page area.
12 | 13 |