Philips HTL2111A user manual Auto standby, Play audio through Bluetooth, Apply factory settings

Note

•• This product may not be compatible with certain types of USB storage device.

•• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.

•• Digital camera PTP protocols are not supported.

•• Do not remove the USB storage device while it is being read.

•• DRM-protected music files (MP3, WMA) are not supported.

•• Support a USB port: 5V , 500mA.

Auto standby

When playing media from a connected device, the SoundBar automatically switches to standby if:

•no button is pressed for 30 minutes, and

•no audio play from a connected device.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.

What you need

•	A Bluetooth device which supports
	Bluetooth profile A2DP, and with Bluetooth
	version as 2.1 + EDR.
•	The operational range between the
	SoundBar and a Bluetooth device is
1	approximately 10 meters (30 feet).
	Press Bluetooth on the remote control
	to switch the SoundBar to Bluetooth
	mode.
	»»The Bluetooth indicator blinks at a fast
2	rate.
	On the Bluetooth device, switch on
	Bluetooth, search for and select PHILIPS
	HTL2111A to start connection (see the

user manual of the Bluetooth device on how to enable Bluetooth).

•When prompted for a password, enter "0000".

»»During connection, the Bluetooth indicator blinks at a lower rate.

3 Wait until the Bluetooth lights up.

»»If the connection fails, the Bluetooth indicator blinks continually at a lower rate.

4 Select and play audio files or music on your Bluetooth device.

• During play, if a call is coming, music play is paused. Play resumes when the call ends.

5 To exit Bluetooth, select other source.

•When your switch back to Bluetooth mode, Bluetooth connection remains active.

Note

•• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.

•• If you want to connect your SoundBar with another Bluetooth device, disable the currently connected Bluetooth device.

Apply factory settings

You can reset your SoundBar to the default setting mode.

1 In mute mode, quickly press AUX twice.

»»The factory settings is restored.

10EN