Philips HTL2111A user manual Help and support, Safety, Risk of electric shock or fire

Page 3

1 Important

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Help and support

For extensive online support, visit www.philips. com/support to:

download the user manual and the quick start guide

watch video tutorials (available only for selected models)

find answers to frequently answered questions (FAQs)

email us a question

chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number.

Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product.You can find this information on the back or bottom of your product.

Safety

Risk of electric shock or fire!

Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.

Never place the product and accessories near naked flames or other heat sources, including direct sunlight.

Never insert objects into the ventilation slots or other openings on the product.

Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Disconnect the product from the power outlet before lightning storms.

When you disconnect the power cord, always pull the plug, never the cable.

Risk of short circuit or fire!

Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different.

Risk of injury or damage to this product!

Never place the product or any objects on power cords or on other electrical equipment.

If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.

Parts of this product can be made of glass. Handle with care to avoid injury and

damage.

Risk of overheating!

Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

Risk of contamination!

Do not mix batteries (old and new or carbon and alkaine, etc.).

Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.

Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

Batteries contain chemical substances, they should be disposed of properly.

2EN

Image 3
Contents Register your product and get support at Always there to help youContents Damage Risk of overheating SafetyHelp and support Risk of electric shock or fireCompliance Use only microfiber cloth to clean the productCare for your product Care of the environmentTrademarks Your SoundBar Remote controlThis section includes an overview of the remote control Lights up when you switch to coaxial input sourceConnectors Rear connectorsSide right Option 1 Connect audio through a digital optical cable PlacementConnect Connect audio from TV and other devicesOption 3 Connect audio through analog audio cables USB storage devices Adjust the volumeChoose your sound MP3 playerPlay audio through Bluetooth Apply factory settingsAuto standby Screw length/diameter Wall mountAudio BluetoothRemote control batteries AmplifierDevice cannot connect with the SoundBar TroubleshootingSound No sound from SoundBar speakersHTL2111A12UMV1.0