Grizzly H7582 instruction manual Tuners, To install the tuners

Tuners
Components Needed	Qty
Guitar Neck	1
Bushings	6
Tuning Head Plate	1
Black Screws #3 x 3⁄8"	7
Wooden Block	1
Hammer	1
Peghead Reamer or a Round File (Optional)	... 1
The tuning head plate consists of six machine
heads on a metal plate. The machine heads are
attached to the headstock with bushings and
small screws.
To install the tuners:

1.Place the six bushings into the holes on the face of the headstock (Figure 6). The holes may need to be widened with a peghead reamer or a round file. DO NOT widen the holes too much—the bushings should fit snugly.

Figure 6. Installing plastic bushings on head-

stock.

2.Place a wooden block on the bushings and lightly tap the block with a hammer (Figure 7) until the bushings are seated against the face of the headstock.

Figure 7. Seating bushings.

3.Slide the machine heads through the bush- ings from the back face of the headstock.

4.Align the tuning head plate over the mounting holes and secure with #3 x 3⁄8" black screws as shown in Figure 8.

Figure 8. Tuning head plate installed correctly.

Model H7582 Junior Electric Guitar Kit -9-