Metra Electronics 99-5806 installation instructions KIT Assembly

99-5806

KIT ASSEMBLY

DIN HEAD UNIT PROVISIONS:

1Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down.

2Slide the after-market head unit into the cage and secure. Snap the Trim plate into the Radio Housing.

ISO DIN HEAD UNIT PROVISIONS:

1Mount the ISO Brackets to the head unit with the screws supplied with the unit.

2Slide the head unit into the radio opening until the side clips engage. Snap the Trim plate into the Radio Housing.

NOTE: When reinstalling the screws into the bottom of the 99-5806 use the

(2)supplied Phillips screws instead of the factory screws removed in step 5 in Dash Disassembly.

3