DigiTech CR-7 manual Declaration of Conformity

Page 2

DECLARATION OF CONFORMITY

Manufacturer’s Name:

DigiTech

Manufacturer’s Address:

8760 S. Sandy Parkway

 

Sandy, Utah 84070, USA

declares that the product:

 

Product name:

HardWire CR-7

Product option:

All (requires Class II power

 

adapter that conforms to the

 

requirements of EN60065,

 

EN60742, or equivalent.)

conforms to the following Product Specifications:

Safety:

IEC 60065 (7th ed. 2001)

EMC:

EN 55013 (2001+A1)

 

EN 55020 (1998)

Supplementary Information:

The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.

 

Vice-President of Engineering

 

8760 S. Sandy Parkway

 

Sandy, Utah 84070, USA

 

Date: June 10, 2008

European Contact:

Your local DigiTech Sales and

 

Service Office or:

 

Harman Music Group

 

8760 South Sandy Parkway

 

Sandy, Utah

 

84070 USA

 

Ph: (801) 566-8800

 

Fax: (801) 568-7583

Warning

For your protection, please read the following:

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Do not use this apparatus near water.

5.Clean only with dry cloth.

6.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

9.Unplug this apparatus during lightning storms or when unused for long periods of time.

10.No user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

12.Refer to labels on the unit, including bottom cover, or other markings and pertinent information.

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic product free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).

For Countries not mentioned above, please contact your local authorities for a correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Image 2
Contents Page Declaration of Conformity Warranty Page Introduction Included ItemsPage What Does This Do? Page Page Page Amp Setup Effects Loop Setup Battery Operation Foot Switch HardWire Performance Accessories Hook-and-loop Pedalboard Pad Foot Switch Glow Sticker StompLock Specifications South Sandy Parkway Sandy, Utah PH 801 FAX 801