DigiTech CR-7 manual

Page 9

7.Input 2 - Connect a second input to this jack for stereo operation. Inputs 1 and 2 are processed separately through the stereo chorus effect and then fed to Outputs 1 and 2 keeping true stereo separa- tion between channels.

8.Foot Switch Release Pins - These two pins are spring loaded hinges that hold the Foot Switch in place. See page 9 for informa- tion on accessing and changing the battery.

9.Indicator LED - Lights when the effect is turned on. When bat- tery power is low (approximately 15 minutes before it dies), the Indicator LED begins to dim giving you advanced warning that very shortly you will need to replace the battery.

10.Foot Switch - Turns the effect on and off.

11.Output 1 (Mono) - Connect this output to the input of a single guitar amplifier, another pedal input, or an amp effects return.



Image 9
Contents Page Declaration of Conformity Warranty Page Included Items IntroductionPage What Does This Do? Page Page Page Amp Setup Effects Loop Setup Battery Operation Foot Switch HardWire Performance Accessories Hook-and-loop Pedalboard Pad Foot Switch Glow Sticker StompLock Specifications South Sandy Parkway Sandy, Utah PH 801 FAX 801