KeyRig 25 Quick Start Guide
Installing Key Rig Virtual Instrument Software for Windows
1.Insert the KeyRig 25 CD-ROM into your computer’s CD-ROM drive.
2.The computer will automatically display the interactive install screen. If your computer fails to launch the installer, manually start it by clicking on Start > My Computer > KeyRig 25.
3.Choose Key Rig Virtual Instrument from the drop-down menu and click “Install.”
4.Follow the driver installer’s on-screen instructions.
5.During setup, the installer will ask you to specify a Key Rig Data Directory and a VST Plug-in Directory. The Key Rig Data Directory is where all Key Rig application data (approximately 350 MB in size) is installed whereas the VST folder is where you would like to install Key Rig software’s VST plug-in files. If you are not sure about these folders, leave the default settings.
6.When the installer has completed the software installation, click “Finish.”
7.M-Audio Key Rig is now installed on your computer. You will need to “Certify” your copy of the software before you begin using it. Certification is described in the following section.
