Keyspan Keyrig25 quick start KeyRig 25 Controller Keyboard Quick Installation

KeyRig 25 Quick Start Guide

KeyRig 25 Controller Keyboard

Quick Installation

Your KeyRig 25 controller is class-compliant and requires no drivers when used under Windows XP or Mac OS X. To install the keyboard:

1.Turn on your computer.

2. Use the provided USB cable to connect KeyRig 25 to an available USB port on your computer.

3. Make sure that the power switch on the back of the controller is in

KeyRig 25 is now ready to be used.

NOTE: Advanced Windows XP users who plan to 1.) use the keyboard with more than one audio application at the same time, or 2.) send long SysEx (system exclusive) commands, must install special multi-client drivers. This process is described in the Key Rig 25 User Guide located on the KeyRig 25 CD-ROM.

IMPORTANT: The KeyRig 25 keyboard is “bus-powered” by your computer through the USB connection. Only use a power adapter if your computer cannot provide adequate power to the controller or if you are using KeyRig 25 without a computer.

1