Side view | Rear view |
(H)
(B)
(G)
(F)
3.Fasten (A) and (B) with four screws
(H) from the front and fasten (B) and
(C) with three screws (G) from the back.
4.Place the piano on the stand. Then, slide the piano backward to place it at the appropriate point for screws. Hold the piano on the stand so that it doesn’t fall from the stand. Then fasten the piano and the stand with four long screws.
CAUTION: Be sure to secure the piano to the stand with the screws. If you fail to do so, the unit could fall from the stand causing damage or personal injury.
5.Insert the pedal connection cord that comes from Pedal Board (C) into the piano’s pedal jack and fasten with clamps
6.Turn the adjuster (installed on the bottom of C) until it touches the floor to support the pedal board.
– 7 –