Transmit Midi Program Change

The term “Multi-Timbral” is derived from the ability to play multiple timbres simultaneously.

NOTE:

You can assign any sound of the CN2 piano to any channel in the way you like by sending the correct Program Change Number to the CN2 piano from an external MIDI device. See page 26 for assignment of sound and program number.

(1)Press the “MULTI” key while holding down the METRONOME and SOUND SELECT buttons.

(2)While still holding down the METRONOME and SOUND SELECT buttons, pressing the “off” key sets the Multi-Timbral mode to “off”. If you press the “on” key, this function returns to “on”.

9.TRANSMIT MIDI PROGRAM CHANGE

You can set the CN2 piano if it should transmit Program Change

Numbers via MIDI when the sound is changed on the control panel.

(1)Press the “PROGRAM” key while holding down the METRONOME and SOUND SELECT buttons.

(2)While still holding down the METRONOME and SOUND SELECT buttons, pressing the “off” key sets the CN2 piano not to transmit the program change data corresponding to the sound selected on the panel. If you press the “on” key, this function returns to “on” and selecting a sound will transmit the data.

(3)You can also transmit the desired program change number directly by entering the number as a three digit number by using the number keys while holding down the METRONOME and SOUND SELECT buttons.

– 23 –