ASSEMBLING THE STAND
Be sure that all parts are included before starting to assemble your unit.
PARTS PROVIDED |
|
|
|
|
|
| |
Side Panel (A) | 2 pcs. |
|
|
|
|
| |
Back Panel (B) | 1 pc. |
|
|
|
|
| |
Pedal Board (C) | 1 pc. |
|
|
|
|
| |
Screw (D) | 2 pcs. |
|
|
|
|
| |
Screw (E) | 4 pcs. |
|
|
|
|
| |
Bolt (F) | 8 pcs. |
|
|
|
|
| |
Adjuster (G) | 1 pc. | (D) | (E) | (F) | (G) | (H) | |
Cord Clamp (H) | 1 pc. | ||||||
|
|
|
|
|
Bottom View
(G)
(F)
(A)
(C)
2.Fasten Side Panel (A) and Back Panel (B) with two screws (D). Then fix Back Panel
(B) to Pedal Board (C) with four screws (E).
1.Insert the Adjuster (G) on the bottom of Pedal Board (C). Fasten Side Panel (A) and Pedal Board (C) with four bolts (F).
(A)
(D)
(C)
(E)
(B)
(F)
Hand or Finger catching hazard
3.Place the piano on the front half of the stand so that the metal fitting holes are seen when viewed from the top. Slide the piano backward while holding it with one hand so that it does not incline and fall from the stand. The hooks on the piano are then engaged with the metal fittings on the Side Panels. Pay attention so that your hand or fingers are not caught between the stand and piano. Fasten the piano and the stand with four bolts (F).
– 6 –