Kawai CA-X manual Status of Song and Part, Playing Back the Parts Separately

Page 19

When you are finished recording, press the PLAY/STOP button again.

STATUS OF SONG AND PART

You have probably noticed that some of the LED indicators are flashing, some are turned on, and some are turned off. The LED indicates the status of recording and play back as shown below.

The LED that is on indicates that the song or part has already been recorded.

The flashing LED indicates that the song or part is selected to record or play back.

The LED that is off indicates that the song or part is empty.

If you have recorded more than one song, you can check the song status, by pressing the REC or PLAY/STOP button.

3.2PLAYING BACK A SONG (PLAY/STOP BUTTON)

The PLAY/STOP button is used to select a song and part to play, and to start and stop play back of the recorded songs.

Press the PLAY/STOP button and the recorded song will start playing.

Press the PLAY/STOP button again to stop play back.

If you would like to listen to a different song, select your desired song number using the SOUND SELECT buttons while holding down the PLAY/STOP button and then release the buttons to start play back. The LED indicator for the selected song will flash when holding

down the PLAY/STOP button.

PLAYING BACK THE PARTS SEPARATELY

When you select a song recorded with two parts, you can play back the parts separately.

Hold down the PLAY/STOP button and look at the Part buttons.

The LED indicators for both parts will be on, indicating that you have successfully recorded two tracks. Release the PLAY/STOP button to

listen to what you have recorded. You should hear both parts.

Recorder

RECORDER

15

Image 19

Contents CA-X Important Safety Instructions OFF Declaration of Conformity according to FCC Part Thank YOU for Purchasing a Kawai Digital Piano Advanced Playing Jacks Pedals Supplying AC PowerSetting UP the Piano Listening to the CA-XPlaying the Piano Power SwitchVolume Slider Demo SongsPress the Sound Select button under the name Selecting Another Preset SoundPlaying with More Sounds Now try playing the keyboardValue Buttons About PolyphonyDUAL/SPLIT Balance Slider Selecting Split SoundsChanging the Split Point SplitTo ADD Reverb Metronome To ADD Other EffectsStarting the Metronome Changing the Time SignatureTo stop the metronome, press the Beat button again Adjusting the Metronome VolumeSound selection Pedal movements Basics of the RecorderTWO-TRACK FIVE-SONG Recorder Recorded InformationRecorder and Metronome Recording Another SongRecording REC Button Recording CapacityRecording a Second Part Press the PLAY/STOP button when you are finished recordingPress the PLAY/STOP button again to stop play back Status of Song and PartPlaying Back the Parts Separately Playing Back a Song PLAY/STOP ButtonErasing ALL the Songs Usingthe PLAY/STOP Buttonto Start RecordingErasing a Song Listening to the Song Selecting a SongButton again to stop Easy Beat Part Volume Balance for Concert MagicPerforming a Song Concert Magic Song Arrangement TypesSkillful Melody PlayDesired category Steady BeatConcert Magic Song Demo To stop the demo, press the Demo button againAdjusting the Playback Speed for the Concert Magic Songs Selecting the Touch Sensitivity Touch Button Transposing the Piano Transpose Button User TouchTuning Mersenne Pure Temperament Major TemperamentBrief Explanation of Temperaments Equal Temperament Piano onlyEqual Temperament Flat Pythagorean TemperamentMeantone Temperament Werckmeister III Temperament Kirnberger III TemperamentUse the Value buttons to change the channel number KEY Signature of TemperamentMidi Channel Transmit Program Change ON/OFFMulti-Timbral Off MULTI-TIMBRAL Mode ON/OFFLocal Control ON/OFF Multi-Timbral On On1 and On2Sending Program Change Numbers Channel MuteThen use the Value buttons to turn them on and off Lower Pedal ON/OFF Lower Octave ShiftLayer Octave Shift Damper Hold Layer DynamicsMidi Channel What is MIDI?Understanding Midi Midi JacksMidi Keyboard #1 Midi Keyboard #2 Change the channel number Using the CA Piano AS ControllerMidi Connection Changing Transmitting ChannelCA-X Program ChangeButtons Using the CA Piano AS a MULTI-TIMBRAL Sound ModuleLocal Control Press the Church Organ button while holding down the TouchMULTI-TIMBRAL Mode Using Midi Using Midi Jacks Jacks Program Change Number Mapping AppendicesConcert Magic Song List Sound Demo Song List Front PanelCA-X SpecificationsMidi Exclusive Data Format Kawai Digital Piano Model CA-X Midi Implementation ChartEng