Kohler KD165 manual Volume Settings for the Auto Player

Page 8

VOLUME SETTINGS FOR THE AUTO PLAYER

The player piano and the accompaniment volume can be adjusted from the front panel sliders as well as from the infra red remote controller. It is recomended first to adjust the front panel sliders and then use the remote controller for convenient operation.

Aim to the CD player with the remote controller and and press the MED VOL button

Play the keyboard like you normally would and

Set all four sliders to 0adjust the MASTER VOLUME and TONE to the desired setting.

Insert a player piano CD into the CD player or select a song in the SONG PLAY section from a floppy disk or the hard drive.

Remember, that only SONG1 can be used in the AUTO PLAYER mode and the BALANCE SLIDER has to be in the upper (SONG1) position.

Start the playback by pressing the AUTO PLAYER button (if you want to play a CD), or PLAY1 in the SONG PLAY section after loading the song into the memory.

Slowly move the ACC/SEQ VOLUME slider up to increase the PIANO volume, and the ASSIGN SLIDER to adjust the accompaniment level (if playing an orchestrated CD). After this basic adjustment you can also use the remote control functions as described next.

9

Image 8
Contents Page KD165 Welcome Kohler CD Power Rail Connector IR SensorAnalog Midi OUT Kohler CDAS on Playback StopAuto Play PauseVolume Settings for the Auto Player Track Selection Prev Previous and Next Next VolumePreset Master Volume Settings Balance Bass and Treble ControlsMute Piano Mute Piano Expression LevelStandard Audio CD Playback RepeatRandom When C2 source is being detected the display shows Source SelectVersion of the firmware as per the example above is